Cisco Catalyst 6500/7600 series Supervisor Engine WS-SUP720-3BXL is designed for enterprise core and distribution as well as datacenter deployment. WS-SUP720-3BXL is the member of Supervisor Engine 720 family, installed with PFC3BXL module (WS-F6K-PFC3BXL) to build hardware base CEF architecture by supporting centralized forwarding (CEF) and distributed forwarding (dCEF) with enabling MPLS label switching and ACE counters.
Supervisor Engine WS-SUP720-3BXL integrates with both MSFC3 and PFC3 in hardware. MSFC3 delivers high performance, multilayer switching and routing intelligence by efficiently utilizing CPU resources; PFC3 takes advantage of hardware-based features by supporting routing and bridging, QoS, multicast packet replication and security policies.
Note: Cisco Catalyst Supervisor Engine WS-SUP720-3BXL does not support VSS.
Model info: VS-S720-10G-3BXL Product Description Catalyst 6500 Supervisor engine 720-3BXL (PFC 3BXL) Devide Tyde Control Processor Ports 2 * 10/100/1000, 1 SFP Uplinks 2 Gigabit Console ports RS-232 Centralized switching capacity 720 Gbps Per-slot switching capacity 40 Gbps Compatibility ● Cisco 6500 Catalyst Series
● Cisco 7600 Catalyst Series
VSS No FNF (Flexible NetFlow) entries 256000 Forn Factor Plug-in Module Memory ●WS-SUP720-3BXL supports 1GB of DRAM for the route processor and 1GB for the switch processor
●64MB or 512MB (s/w image dependent) Boot Flash for SP switch processor and 64-MB of Boot Flash for the route processor
Options Removable storage: 64MB, 128 MB, 256 MB, 512 MB (Compact Flash) Throughput (in hardware) ● 400 Mpps for IPv4
● 200 Mpps for IPv6
● 400 Mpps for Layer 2 Bridging
Routing entries ● IPV4: 1,000,000
● IPV6: 500,000
Security ACL entries 32,000 Reflexive ACLs 256,000 Number of interfaces with unique ACLs 4,000 MAC ACLs on IP Yes MAC addresses 64,000 VRFs 1024 (700 for MPLS) Aggregate Traffic Rate-Limiting Policers 1,023 uRPF Check in Hardware Up to 6 paths NAT Hardware assisted Slot assignment ●Catalyst 6503-E / 7603: Slot 1 and 2
●Catalyst 6504-E: Slot 1 and 2
●Catalyst 6506 / 7606: Slot 5 and 6
●Catalyst 6506-E: Slot 5 and 6
●Catalyst 6509 / 7606: Slot 5 and 6
●Catalyst 6509-E: Slot 5 and 6
●Catalyst 6509-V-E: Slot 5 and 6
●Catalyst 6513 / 7613: Slot 7 and 8
Protocol ● Layer 3 routing protocols, Border Gateway Protocol version 4 (BGPv4), Open Shortest Path First (OSPF), Intermediate System-to-Intermediate System (IS-IS), Enhanced Interior Gateway Routing Protocol(EIGRP), Routing Information Protocol (RIP), Distributed FIB Switching, Cisco Discover Protocol (CDP), Internet Control Message Protocol (ICMP)
● Traditional Protocols such as Internetwork Packet Exchange (IPX), Appletalk, DECnet, Virtual Integrated Network Service (VINES), Connectionless Network Service (CLNS)
● Multicast forwarding, Protocol independent Multicast (PIM) (both sparse and dense mode), (S,G), (*,G), Bi-Directional PIM in hardware
● Comprehensive MPLS support
● Cisco Group Management Protocol and Internet Group Management Protocol (IGMP) snooping
System software / Modules Software Compatibility ● Catalyst 6500 Series
● WS-Sup720: 8.1(1) and higher
● WS-SUP720: 12.2(14)SX and higher
● WS-Sup720-3BXL: 8.3(2) and higher
● WS-Sup720-3BXL: 12.2(17d)SXB1 and higher
● Cisco 7600 Series
● WS-SUP720 supports Cisco IOS 12.2(14)SX2 and later
● WS-SUP720-3BXL supports Cisco IOS 12.2(17d)SXB and late
Reliability and Availability ● Fast software upgrade
● Route Processor Redundancy+ (RPR+)
● Stateful Switchover + Nonstop Forwarding (SSO + NSF)
● Online insertion and removal (OIR) hot swap
DRAM ● MEM-S3-1GB: Catalyst 6500 1GB SP DRAM for Sup720 and Sup720-3B
● MEM-MSFC2-512MB: Catalyst 6500 512MB DRAM on the MSFC2 or SUP720 MSFC3
Compact Flash memory ● MEM-C6K-CPTFL1G: Catalyst 6500 Compact Flash Memory 1GB
● MEM-C6K-CPTFL512M: Catalyst 6500 Sup720 Compact Flash Mem 512MB
● MEM-C6K-CPTFL256M: Cat6500 Sup720 Compact Flash Mem 256MB
● MEM-C6K-CPTFL128M: Cat6500 Sup720 Compact Flash Mem 128MB
Environmental Conditions ● Operating temperature: 32 to 104ºF (0 to 40ºC)
● Storage temperature: -40 to 167ºF (-40 to 75ºC)
● Relative humidity: 10 to 90 percent, noncondensing
● Regulatory compliance
- Shipping & Payment
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time DHL 2-4 business days Fedex 2-4 business days Hong Kong EMS 5-10 business days Hong Kong Air Parcel 10-20 business days By Sea 10-20 business days
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Router-switch.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.Router-switch.com can facilitate the progress under buyer's permission and at buyer's expense.
Deliver to door:
Router-switch.com will quote all destination charge prior once we have confirmed order.
Router-switch.com is responsible for transporting goods to door after you have made the payment.
Paypal Master Card Visa Discover American
JCB Wire Transfer eCheck WestUnion
100% Low Price Guarantee:
Router-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance:
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed" or "Used / Refurbished".
Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.
Free CCIE Technical Support:
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Cisco product: 1 Year
Used Cisco product: 3 Month
The Support Contacts:
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.