
Item#: WS-C2960S-48FPD-L Catalyst 2960-S Series GE Switch



Catalyst 2960 Series Switches with LAN Base Software Switch Configurations
Table 1. Configurations of Cisco Catalyst WS-C2960-S Series Switches with LAN Base Software
|
Cisco Catalyst WS-C2960-S Switch Model |
Description |
Uplinks |
Available PoE Power |
|
10 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity |
|||
|
48 Ethernet 10/100/1000 PoE+ ports |
2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports |
740W |
|
|
48 Ethernet 10/100/1000 PoE+ ports |
2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports |
370W |
|
|
24 Ethernet 10/100/1000 PoE+ ports |
2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports |
370W |
|
|
48 Ethernet 10/100/1000 ports |
2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports |
- |
|
|
24 Ethernet 10/100/1000 ports |
2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP ports |
- |
|
|
1 Gigabit Uplinks with 10/100/100 Ethernet Connectivity |
|||
|
48 Ethernet 10/100/1000 PoE+ ports |
4 One Gigabit Ethernet SFP ports |
740W |
|
|
48 Ethernet 10/100/1000 PoE+ ports |
4 One Gigabit Ethernet SFP ports |
370W |
|
|
24 Ethernet 10/100/1000 PoE+ ports |
4 One Gigabit Ethernet SFP ports |
370W |
|
|
48 Ethernet 10/100/1000 ports |
4 One Gigabit Ethernet SFP ports |
- |
|
|
24 Ethernet 10/100/1000 ports |
4 One Gigabit Ethernet SFP ports |
- |
|
|
Cisco Catalyst WS-C2960S-STACK |
Hot-swappable FlexStack stacking module |
- |
- |
|
All models available with optional Cisco FlexStack stacking module. No DC power supplies are available. |
|||
Table 2. Configurations of Cisco Catalyst 2960 Series Switches with LAN Base Software
|
Cisco Catalyst 2960 Switch Model |
Description |
Uplinks |
Available PoE Power |
|
1 Gigabit Uplinks with 10/100 Ethernet Connectivity |
|||
|
48 Ethernet 10/100 PoE ports |
2 One Gigabit Ethernet SFP ports and 2 fixed Ethernet 10/100/1000 ports |
370W |
|
|
24 Ethernet 10/100 PoE ports |
2 dual-purpose ports (10/100/1000 or SFP) |
370W |
|
|
24 Ethernet 10/100 ports |
2 Ethernet 10/100/1000 ports |
123W |
|
|
24 Ethernet 10/100 ports |
2 dual-purpose ports |
- |
|
|
48 Ethernet 10/100 ports |
2 dual-purpose ports (10/100/1000 or SFP) |
- |
|
|
24 Ethernet 10/100 ports |
2 Ethernet 10/100/1000 ports |
- |
|
|
48 Ethernet 10/100 ports |
2 Ethernet 10/100/1000 ports |
- |
|
|
1 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity |
|||
|
24 Ethernet 10/100/1000 ports, 4 of which are dual-purpose (10/100/1000 or SFP) |
4 dual-purpose ports (10/100/1000 or SFP) |
||
|
48 Ethernet 10/100/1000 ports, 4 of which are dual-purpose (10/100/1000 or SFP) |
4 dual-purpose ports (10/100/1000 or SFP) |
||
|
Compact Switches |
|||
|
8 Ethernet 10/100 ports; compact size with no fan |
1 dual-purpose port (10/100/1000 or SFP) |
||
|
8 Ethernet 10/100 ports; compact size with no fan |
1 10/100/1000 PoE input port |
||
|
7 Ethernet 10/100/1000 ports; compact size with no fan |
1 dual-purpose port (10/100/1000 or SFP) |
||
|
Switch Model |
Maximum Number of PoE+ (IEEE 802.3at) Ports* |
Maximum Number of PoE (IEEE 802.3af) Ports* |
Available PoE Power |
|
10 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity |
|||
|
24 ports up to 30W |
48 ports up to 15.4W |
740W |
|
|
12 ports up to 30W |
24 ports up to 15.4W 48 ports up to 7.7W |
370W |
|
|
12 ports up to 30W |
24 ports up to 15.4W |
370W |
|
|
1 Gigabit Uplinks with 10/100/1000 Ethernet Connectivity |
|||
|
24 ports up to 30W |
48 ports up to 15.4W |
740W |
|
|
12 ports up to 30W |
24 ports up to 15.4W 48 ports up to 7.7W |
370W |
|
|
12 ports up to 30W |
24 ports up to 15.4W |
370W |
|
|
N/A |
24 ports up to 15.4W |
370W |
|
|
N/A |
24 ports up to 15.4W |
370W |
|
|
N/A |
8 ports up to 15.4W |
123W |
|
Table 4. Cisco Catalyst WS-C2960-S and 2960 Series Switches with LAN Base Software switch performance and scalability information
|
Performance and Scalability Numbers for All Switch Models |
||||
|
Catalyst WS-C2960-S |
Catalyst 2960 |
|||
|
Forwarding bandwidth |
88 Gbps |
16 Gbps 32 Gbps (2960G) |
||
|
Switching bandwidth* |
176 Gbps |
32Gbps 32 Gbps (2960G) |
||
|
Flash memory |
64 MB |
32 MB |
||
|
Memory DRAM |
128 MB |
64 MB |
||
|
Max VLANs |
255 |
255 |
||
|
VLAN IDs |
4000 |
4000 |
||
|
Maximum transmission unit (MTU) |
9198 bytes |
Up to 9000 bytes |
||
|
Jumbo frames |
9216 bytes |
9018 bytes (2960G only) |
||
|
Forwarding Rate: 64-Byte Packet Cisco Catalyst WS-C2960-S |
||||
|
101.2 mpps |
||||
|
101.2 mpps |
||||
|
65.5 mpps |
||||
|
101.2 mpps |
||||
|
65.5 mpps |
||||
|
77.4 mpps |
||||
|
77.4 mpps |
||||
|
41.7 mpps |
||||
|
Cisco Catalyst 2960XS-48TS-L |
77.4 mpps |
|||
|
41.7 mpps |
||||
|
Forwarding Rate: 64-Byte Packet Cisco Catalyst 2960 |
||||
|
2.7 mpps |
||||
|
2.7 mpps |
||||
|
6.5 mpps |
||||
|
6.5 mpps |
||||
|
6.5 mpps |
||||
|
6.5 mpps |
||||
|
10.1 mpps |
||||
|
10.1 mpps |
||||
|
13.3 mpps |
||||
|
11.9 mpps |
||||
|
35.7 mpps |
||||
|
39.0 mpps |
||||
| Resource: Cisco Catalyst WS-C2960-S and 2960 | Default | QoS | Dual | |
| Unicast MAC addresses |
8000 |
8000 |
8000 |
|
| IPv4 IGMP groups |
255 |
255 |
255 |
|
| IPv4 MAC QoS access control entries (ACEs) |
128 |
384 |
0 |
|
|
IPv4 MAC security ACEs |
384 |
128 |
256 |
|
Table 5. Dimensions, weight, acoustic, MTBF and environmental range
|
Dimensions (H x W x D) |
||||||||
|
Cisco Catalyst WS-C2960-S |
Inches |
Centimeters |
||||||
|
1.75 x 17.5 x 15.2 |
4.5 x 44.5 x 38.6 |
|||||||
|
1.75 x 17.5 x 11.8 |
4.5 x 44.5 x 30 |
|||||||
|
1.75 x 17.5 x 15.2 |
4.5 x 44.5 x 38.6 |
|||||||
|
1.75 x 17.5 x 11.8 |
4.5 x 44.5 x 30 |
|||||||
|
Cisco Catalyst 2960 |
Inches |
Centimeters |
||||||
|
1.73 x 10.6 x 6.2 |
4.4 x 27 x 15.7 |
|||||||
|
1.73 x 10.6 x 6.4 |
4.4 x 27 x 16.3 |
|||||||
|
1.73 x 17.7 x 9.52 |
4.4 x 45 x 23.6 |
|||||||
|
1.73 x 17.7 x 13 |
4.4 x 45 x 33.2 |
|||||||
|
1.73 x 17.7 x 13.07 |
4.4 x 45 x 23.6 |
|||||||
|
1.73 x 10.6 x 8.1 |
4.4 x 27 x 20.5 |
|||||||
|
1.73 x 17.7 x 12.9 |
4.4 x 45 x 32.8 |
|||||||
|
Weight |
||||||||
|
Cisco Catalyst WS-C2960-S |
Pounds |
Kilograms |
||||||
|
13 |
5.9 |
|||||||
|
12.5 |
5.7 |
|||||||
|
12.5 |
5.7 |
|||||||
|
9.5 |
4.3 |
|||||||
|
9.5 |
4.3 |
|||||||
|
13 |
5.9 |
|||||||
|
12.5 |
5.7 |
|||||||
|
12.5 |
5.7 |
|||||||
|
10.5 |
4.8 |
|||||||
|
10 |
4.5 |
|||||||
|
Cisco Catalyst 2960 |
Pounds |
Kilograms |
||||||
|
3 |
1.4 |
|||||||
|
3 |
1.4 |
|||||||
|
8 |
3.6 |
|||||||
|
8 |
3.6 |
|||||||
|
10 |
4.5 |
|||||||
|
12 |
5.4 |
|||||||
|
8 |
3.6 |
|||||||
|
8 |
3.6 |
|||||||
|
12 |
5.4 |
|||||||
|
3 |
1.4 |
|||||||
|
10 |
4.5 |
|||||||
|
12 |
5.4 |
|||||||
|
Environmental Ranges |
||||||||
|
Cisco Catalyst WS-C2960-S |
Cisco Catalyst 2960 |
|||||||
|
Fahrenheit |
Centigrade |
Fahrenheit |
Centigrade |
|||||
|
Operating temperature up to 5000 ft (1500 m) |
0º to 113ºF |
-5º to 45ºC |
23º to 113ºF |
-5º to 45ºC |
||||
|
Operating temperature up to 10,000 ft (3000 m) |
23º to 104ºF |
-5º to 40ºC |
23º to 104ºF |
-5º to 40ºC |
||||
|
Short-term exception at sea level* |
23º to 31ºF |
-5º to 55ºC |
23º to 31ºF |
-5º to 55ºC |
||||
|
Short-term exception up to 5000 feet (1500 m)* |
23º to 122ºF |
-5º to 50ºC |
23º to 122ºF |
-5º to 50ºC |
||||
|
Short-term exception up to 10,000 feet (3000 m)* |
23º to 113ºF |
-5º to 45ºC |
23º to 113ºF |
-5º to 45ºC |
||||
|
Short-term exception up to 13,000 feet (4000 m)* |
23º to 104ºF |
-5º to +40ºC |
23º to 104ºF |
-5º to 40ºC |
||||
|
Storage temperature up to 15,000 feet (4573 m) |
-13º to 158ºF |
-25º to 70ºC |
-13º to 158ºF |
-25º to 70ºC |
||||
|
Feet |
Meters |
|||||||
|
Operating altitude |
Up to 10,000 |
Up to 3000 |
Up to 10,000 |
Up to 3000 |
||||
|
Storage altitude |
Up to 13,000 |
Up to 4000 |
Up to 13,000 |
Up to 4000 |
||||
|
Operating relative humidity |
10% to 95% noncondensing |
10% to 95% noncondensing |
||||||
|
Storage relative humidity |
10% to 95% noncondensing |
10% to 95% noncondensing |
||||||
|
Acoustic Noise |
||||||||
|
Measured per ISO 7779 and declared per ISO 9296. |
||||||||
|
Bystander positions operating mode at 25°C ambient. |
||||||||
|
Sound Pressure |
Sound Power |
|||||||
|
Model |
LpA (Typical) |
LpAD (Maximum) |
LwA (Typical) |
LwAD (Maximum) |
||||
|
42 dB |
45 dB |
5.2 B |
5.5 B |
|||||
|
44 dB |
47 dB |
5.4 B |
5.7 B |
|||||
|
42 dB |
45 dB |
5.2 B |
5.5 B |
|||||
|
44 dB |
47 dB |
5.4 B |
5.7 B |
|||||
|
Mean time between failures (MTBF) |
||||||||
|
Cisco Catalyst WS-C2960-S |
Cisco Catalyst 2960 |
|||||||
|
Model |
MTBF in hours |
Model |
MTBF in hours |
|||||
|
183,498 |
737,065 |
|||||||
|
198,300 |
615,549 |
|||||||
|
237,016 |
407,707 |
|||||||
|
311,291 |
339,743 |
|||||||
|
332,958 |
402,926 |
|||||||
|
189,242 |
311,781 |
|||||||
|
205,052 |
243,277 |
|||||||
|
245,604 |
336,409 |
|||||||
|
328,058 |
180,427 |
|||||||
|
349,824 |
485,576 |
|||||||
|
Cisco Catalyst WS-C2960S-STACK |
25,743,890 |
313,828 |
||||||
|
221,432 |
||||||||
Note:For Catalyst WS-C2960G-8TC-L, reduce the high range temperature by 5°C.
Table 6. Connectors, LED indicators and Dimensions
Connectors and LED Indicators
Cisco Catalyst WS-C2960-S with SFP+ based ports:
• 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
• 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
• 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
• 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
• 1000BASE-SX, -LX/LH, -ZX, -BX, -T,* -FX,* and coarse wavelength-division multiplexing (CWDM) SFP-based ports: LC fiber connectors (single/multimode fiber)
• 10GBASE-LR, SR, LRM, CX1 SFP+ based ports
*The Cisco Catalyst WS-C2960-S with SFP+ does not support the GLC-FE-100BX, GLC-FE-100FX, or GLC-FE-100LX.
Cisco Catalyst WS-C2960-S and 2960 with SFP-based ports:
• 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 UTP cabling
• 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
• 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
• 1000BASE-T SFP-based ports**: RJ-45 connectors, 4-pair Category 5 UTP cabling
• 1000BASE-SX -LX/LH, -ZX, -BX, -T,* -FX,* and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
• 100BASE-LX, -BX, -FX SFP-based ports: LC fiber connectors (single/multimode fiber)
*GLC-T and GLC-GE-100FX are not supported on the Catalyst WS-C2960-8TC-S, 2960-8TC-L, or 2960G-8TC-L switches.
Cisco Catalyst WS-C2960-S FlexStack stacking cables:
• CAB-STK-E-0.5M FlexStack stacking cable with a 0.5 m length
• CAB-STK-E-1M FlexStack stacking cable with a 1.0 m length
• CAB-STK-E-3M FlexStack stacking cable with a 3.0 m length
Cisco Catalyst WS-C2960-S console cables:
• CAB-CONSOLE-RJ45 Console cable 6 ft with RJ-45
• CAB-CONSOLE-USB Console cable 6 ft with USB Type A and mini-B connectors
• Customers can provide power to a switch by using the internal power supply. The connector is located at the back of the switch. These switches do not have a redundant-power-supply port
• The internal power supply is an auto-ranging unit
• The internal power supply supports input voltages between 100 and 240 VAC
• Use the supplied AC power cord to connect the AC power connector to an AC power outlet
• Cisco RPS connector:
• The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.
• The connector offers a 2300W redundant power system that supports up to 6 external network devices and provides power to 2 failed devices at a time
• The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic
• Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle
Note: The Cisco Catalyst WS-C2960-8TC-L and 2960G-8TC-L do not have RPS ports.
• Per-port status: Link integrity, disabled, activity, speed, and full duplex
• System status: System, RPS, link status, link duplex, PoE, and link speed
Table 7. Management and Standards Support for Cisco Catalyst WS-C2960-S and 2960 Series Switches with LAN Base Software
|
Description |
Specification |
|
|
Management |
• BRIDGE-MIB
• CISCO-CABLE-DIAG-MIB
• CISCO-CDP-MIB
• CISCO-CLUSTER-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-DHCP-SNOOPING-MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
• CISCO-ENVMON-MIB
• CISCO-ERR-DISABLE-MIB
• CISCO-FLASH-MIB
• CISCO-FTP-CLIENT-MIB
• CISCO-IGMP-FILTER-MIB
• CISCO-IMAGE-MIB
• CISCO-IP-STAT-MIB
• CISCO-LAG-MIB
• CISCO-MAC-NOTIFICATION-MIB
• CISCO-MEMORY-POOL-MIB
• CISCO-PAGP-MIB
• CISCO-PING-MIB
• CISCO-POE-EXTENSIONS-MIB
• CISCO-PORT-QOS-MIB
• CISCO-PORT-SECURITY-MIB
• CISCO-PORT-STORM-CONTROL-MIB
• CISCO-PRODUCTS-MIB
• CISCO-PROCESS-MIB
• CISCO-RTTMON-MIB
• CISCO-SMI-MIB
• CISCO-STP-EXTENSIONS-MIB
• CISCO-SYSLOG-MIB
|
• CISCO-TC-MIB
• CICSO-TCP-MIB
• CISCO-UDLDP-MIB
• CISCO-VLAN-IFTABLE
• RELATIONSHIP-MIB
• CISCO-VLAN-MEMBERSHIP-MIB
• CISCO-VTP-MIB
• ENTITY-MIB
• ETHERLIKE-MIB
• IEEE8021-PAE-MIB
• IEEE8023-LAG-MIB
• IF-MIB
• INET-ADDRESS-MIB
• OLD-CISCO-CHASSIS-MIB
• OLD-CISCO-FLASH-MIB
• OLD-CISCO-INTERFACES-MIB
• OLD-CISCO-IP-MIB
• OLD-CISCO-SYS-MIB
• OLD-CISCO-TCP-MIB
• OLD-CISCO-TS-MIB
• RFC1213-MIB
• RMON-MIB
• RMON2-MIB
• SNMP-FRAMEWORK-MIB
• SNMP-MPD-MIB
• SNMP-NOTIFICATION-MIB
• SNMP-TARGET-MIB
• SNMPv2-MIB
• TCP-MIB
• UDP-MIB
• ePM MIB
• CISCO-STACKWISE-MIB (2960-S)
|
|
Standards |
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1p CoS Prioritization
• IEEE 802.1Q VLAN
• IEEE 802.1s
• IEEE 802.1w
• IEEE 802.1X
• IEEE 802.1ab (LLDP)
• IEEE 802.3ad
• IEEE 802.3af
• IEEE 802.3ah (100BASE-X single/multimode fiber only)
• IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
• IEEE 802.3 10BASE-T specification
• IEEE 802.3u 100BASE-TX specification
• IEEE 802.3ab 1000BASE-T specification
• IEEE 802.3z 1000BASE-X specification
|
• 100BASE-BX (SFP)
• 100BASE-FX (SFP)
• 100BASE-LX (SFP)
• 1000BASE-BX (SFP)
• 1000BASE-SX (SFP)
• 1000BASE-LX/LH (SFP)
• 1000BASE-ZX (SFP)
• 1000BASE-CWDM SFP 1470 nm
• 1000BASE-CWDM SFP 1490 nm
• 1000BASE-CWDM SFP 1510 nm
• 1000BASE-CWDM SFP 1530 nm
• 1000BASE-CWDM SFP 1550 nm
• 1000BASE-CWDM SFP 1570 nm
• 1000BASE-CWDM SFP 1590 nm
• 1000BASE-CWDM SFP 1610 nm
• 10GBASE-LR (SFP+)
• 10GBASE-SR (SFP+)
• 10GBASE-LRM (SFP+)
• 10GBASE-CX1 (SFP+)
• RMON I and II standards
• SNMP v1, v2c, and v3
|
|
RFC compliance |
• RFC 768 - UDP
• RFC 783 - TFTP
• RFC 791 - IP
• RFC 792 - ICMP
• RFC 793 - TCP
• RFC 826 - ARP
• RFC 854 - Telnet
• RFC 951 - Bootstrap Protocol (BOOTP)
• RFC 959 - FTP
• RFC 1112 - IP Multicast and IGMP
• RFC 1157 - SNMP v1
• RFC 1166 - IP Addresses
• RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery
• RFC 1305 - NTP
• RFC 1492 - TACACS+
• RFC 1493 - Bridge MIB
• RFC 1542 - BOOTP extensions
• RFC 1643 - Ethernet Interface MIB
• RFC 1757 - RMON
|
• RFC 1901 - SNMP v2C
• RFC 1902-1907 - SNMP v2
• RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6
• FRC 2068 - HTTP
• RFC 2131 - DHCP
• RFC 2138 - RADIUS
• RFC 2233 - IF MIB v3
• RFC 2373 - IPv6 Aggregatable Addrs
• RFC 2460 - IPv6
• RFC 2461 - IPv6 Neighbor Discovery
• RFC 2462 - IPv6 Autoconfiguration
• RFC 2463 - ICMP IPv6
• RFC 2474 - Differentiated Services (DiffServ) Precedence
• RFC 2597 - Assured Forwarding
• RFC 2598 - Expedited Forwarding
• RFC 2571 - SNMP Management
• RFC 3046 - DHCP Relay Agent Information Option
• RFC 3376 - IGMP v3
• RFC 3580 - 802.1X RADIUS
|
Table 8. Voltage and power information
|
AC/DC input voltage and current |
|||||
|
Cisco Catalyst WS-C2960-S |
Voltage (Autoranging) |
Current |
Frequency |
||
|
100 to 240 VAC |
9 to 4 A |
50 to 60Hz |
|||
|
5 to 2 A |
|||||
|
5 to 2 A |
|||||
|
1 to 0.5 A |
|||||
|
1 to 0.5 A |
|||||
|
9 to 4 A |
|||||
|
5 to 2 A |
|||||
|
5 to 2 A |
|||||
|
1 to 0.5 A |
|||||
|
1 to 0.5 A |
|||||
|
Cisco Catalyst 2960 |
Voltage (Autoranging) |
Current |
Frequency |
||
|
100 to 240 VAC |
0.5 to 0.25 A |
50 to 60Hz |
|||
|
0.8 to 0.4 A |
|||||
|
3.0 to 1.5 A |
|||||
|
8.0 to 4.0 A |
|||||
|
5.0 to 2.0 A |
|||||
|
Cisco Catalyst WS-C2960-24TT-L |
1.3 to 0.8 A |
||||
|
Cisco Catalyst WS-C2960G-24TC-L |
3.0 to 1.5 A |
||||
|
DC input 48 VDC (for AC use PWR-A=sold separately) |
0.3 A |
||||
|
Power Rating |
|||||
|
Cisco Catalyst WS-C2960-S |
Cisco Catalyst 2960 |
||||
|
Model |
Power Rating |
Model |
Power Rating |
||
|
0.89 kVA |
11W |
||||
|
0.48 kVA |
0.035 kVA |
||||
|
0.46 kVA |
0.05 kVA |
||||
|
0.09 kVA |
0.075 kVA |
||||
|
0.09 kVA |
0.05 kVA |
||||
|
0.89 kVA |
0.175 kVA |
||||
|
0.48 kVA |
0.470 kVA |
||||
|
0.46 kVA |
0.5 kVA |
||||
|
0.13 kVA |
0.075 kVA |
||||
|
0.09 kVA |
0.05 kVA |
||||
|
0.075 kVA |
|||||
|
0.140 kVA |
|||||
|
DC input voltages (RPS input) |
|||||
|
Cisco Catalyst WS-C2960-S |
|||||
|
12V at 4 A |
-52 V at 15 A |
||||
|
12V at 4 A |
-52 V at 8 A |
||||
|
12V at 3 A |
-52 V at 8 A |
||||
|
12V at 4 A |
N/A |
||||
|
12V at 3 A |
N/A |
||||
|
12V at 4 A |
-52 V at 15A |
||||
|
12V at 4 A |
-52 V at 8 A |
||||
|
12V at 3 A |
-52 V at 8 A |
||||
|
12V at 4 A |
N/A |
||||
|
12V at 4 A |
N/A |
||||
|
Cisco Catalyst 2960 |
|||||
|
12V at 5 A |
5 A |
||||
|
12 V at 8.3 A |
-48 V at 2.7 A |
||||
|
12 V at 11.25 A |
-48 V at 7.8 A |
||||
|
12 V at 4 A |
-48 V at 7.8 A |
||||
|
12 V at 5 A |
|||||
|
12 V at 10.5 A |
|||||
|
No RPS input for Cisco Catalyst WS-C2960PD-8TT-L, Catalyst WS-C2960-8TC-L, or Catalyst WS-C2960G-8TC-L. |
|||||
|
PoE and PoE+ |
|||||
|
• Maximum power supplied per port for PoE+ is 30W.
• Maximum power supplied per port for PoE is 15.4W.
• Total power dedicated to PoE or PoE+ is 370W or 740W.
|
|||||
Table 9. Power Specifications for Cisco Catalyst WS-C2960-S and 2960 Series Switches with LAN Base Software
|
Description |
C2960-S Specifications |
||||
|
Models |
C2960S-48FPD-L |
C2960S-48LPD-L |
C2960S-24PD-L |
C2960S-48TD-L |
C2960S-24TD-L |
|
100 Percent Throughput |
|||||
|
Measured Power Consumption |
81W |
71W |
55W |
55W |
39W |
|
5 Percent Throughput |
|||||
|
Measured Power Consumption |
80W |
70W |
54W |
53W |
38W |
|
5 Percent Throughput (with 50 Percent PoE Loads) |
|||||
|
Measured Power Consumption |
Switch Power: 464W PoE Power: 386W |
Switch Power: 266W PoE Power: 195W |
Switch Power: 249W PoE Power: 195W |
- |
- |
|
100 Percent Throughput (with Maximum Possible PoE Loads) |
|||||
|
Measured Power Consumption |
Switch Power: 870W PoE Power: 744W |
Switch Power: 466W PoE Power: 375W |
Switch Power: 451W PoE Power: 375W |
- |
- |
|
Description |
C2960-S Specifications |
||||
|
Models |
C2960S-48FPS-L |
C2960S-48LPS-L |
C2960S-24PS-L |
C2960S-48TS-L |
C2960S-24TS-L |
|
100 Percent Throughput |
|||||
|
Measured Power Consumption |
79W |
71W |
55W |
52W |
40W |
|
5 Percent Throughput |
|||||
|
Measured Power Consumption |
78W |
70W |
54W |
50W |
39W |
|
5 Percent Throughput (with 50 Percent PoE Loads) |
|||||
|
Measured Power Consumption |
Switch Power: 464W PoE Power: 386W |
Switch Power: 266W PoE Power: 195W |
Switch Power: 249W PoE Power: 195W |
- |
- |
|
100 Percent Throughput (with Maximum Possible PoE Loads) |
|||||
|
Measured Power Consumption |
Switch Power: 870W PoE Power: 744W |
Switch Power: 466W PoE Power: 375W |
Switch Power: 449W PoE Power: 375W |
- |
- |
|
Description |
C2960 Specifications |
||||
|
Models |
C2960-48PST-L |
C2960-24PC-L |
C2960-24LT-L |
C2960-48TC-L |
C2960-24TC-L |
|
100 Percent Throughput |
|||||
|
Measured Power Consumption |
67W |
45W |
36W |
39W |
27W |
|
5 Percent Throughput |
|||||
|
Measured Power Consumption |
63W |
43W |
34W |
36W |
24W |
|
5 Percent Throughput (with 50 Percent PoE Loads) |
|||||
|
Measured Power Consumption |
Switch Power: 262W PoE Power: 187W |
Switch Power: 237W PoE Power: 185W |
Switch Power: 98W PoE Power: 62W |
- |
- |
|
100 Percent Throughput (with Maximum Possible PoE Loads) |
|||||
|
Measured Power Consumption |
Switch Power: 460W PoE Power: 339W |
Switch Power: 433W PoE Power: 357W |
Switch Power: 162W PoE Power: 119W |
- |
- |
|
Description |
C2960 Specifications |
||||
|
Models |
C2960-48TT-L |
C2960-24TT-L |
C2960G-48TC-L |
C2960G-24TC-L |
C2960-24T-L |
|
100 Percent Throughput |
|||||
|
Measured Power Consumption |
42W |
28W |
123W |
72W |
22W |
|
5 Percent Throughput |
|||||
|
Measured Power Consumption |
38W |
26W |
114W |
65W |
21W |
|
5 Percent Throughput (with 50 Percent PoE Loads) |
|||||
|
Measured Power Consumption |
- |
- |
- |
- |
- |
|
100 Percent Throughput (with Maximum Possible PoE Loads) |
|||||
|
Measured Power Consumption |
- |
- |
- |
- |
- |
|
Description |
Compact Switch Specifications |
||
|
Models |
C2960-8TC-L |
C2960PD-8TT-L |
C2960G-8TC-L |
|
100 Percent Throughput |
|||
|
Measured Power Consumption |
12W |
11W |
22W |
|
5 Percent Throughput |
|||
|
Measured Power Consumption |
11W |
N/A |
20W |
|
5 Percent Throughput (with 50 Percent PoE Loads) |
|||
|
Measured Power Consumption |
- |
- |
- |
|
100 Percent Throughput (with Maximum Possible PoE Loads) |
|||
|
Measured Power Consumption |
- |
- |
- |
Note:Disclaimer: All power consumption numbers were measured under controlled laboratory conditions and are provided as an estimate.
Table 10. Safety and Compliance
|
Description |
Specification |
|
Safety certifications |
• UL 60950-1, Second Edition
• CAN/CSA 22.2 No. 60950-1, Second Edition
• TUV/GS to EN 60950-1, Second Edition
• CB to IEC 60950-1 Second Edition with all country deviations
• CE Marking
• NOM (through partners and distributors)
|
|
Electromagnetic emissions certifications |
• FCC Part 15 Class A
• EN 55022 Class A (CISPR22)
• EN 55024 (CISPR24)
• AS/NZS CISPR22 Class A
• CE
• CNS13438 Class A
• MIC
• GOST
• China EMC Certifications
|
|
Environmental |
Reduction of Hazardous Substances (ROHS) 5 |
|
Telco |
Common Language Equipment Identifier (CLEI) code |
|
Warranty |
Limited lifetime warranty |
Conditions:
New WS-C2960S-48FPD-L is original Cisco genuine, New in Box NIB, never be opened or used.
Used WS-C2960S-48FPD-L & refurbished WS-C2960S-48FPD-L is fully tested by Cisco-certified Engineers with good condition.
Warranty:
New sealed WS-C2960S-48FPD-L has Cisco standard One-year warranty.
Used WS-C2960S-48FPD-L & refurbished WS-C2960S-48FPD-L has 2-month warranty.
Free CCIE Engineers Support: (More Details)
Any questions about WS-C2960S-48FPD-L? We provide FREE installation and configuration support.
Technical information about this product: datasheet, specifications (specs), VLAN setting, VPN configuration, hardware installation guide, commands configure, upgrade & download IOS software image, password recovery, dimensions, weight, memory, flash, package accessories, smartnet service, more details please visit www.cisco.com.
100% Money back Guarantee:
Worry-free. If you buy WS-C2960S-48FPD-L from us, have 100% money back guarantee.
Router-switch.com buys & sells WS-C2960S-48FPD-L, original new WS-C2960S-48FPD-L price, used WS-C2960S-48FPD-L price and refurbished WS-C2960S-48FPD-L price. In most cases, we can deliver it next-day. Simply add the item to shopping cart for the best price WS-C2960S-48FPD-L. Good discount rate of Cisco Global Price List WS-C2960S-48FPD-L GPL, save you money.
Buy Cisco / Sell Cisco to us:
If you have any surplus new WS-C2960S-48FPD-L, refurbished WS-C2960S-48FPD-L, used WS-C2960S-48FPD-L, we buy WS-C2960S-48FPD-L, sell WS-C2960S-48FPD-L to us. Liquidation service, buy used Cisco equipment, pay cash.
Buy & sell Cisco 2960S WS-C2960S-48FPD-L switch, New Refurbished Used WS-C2960S-48FPD-L Cisco 2960-S Series GE Catalyst switch WS-C2960S-48FPD-L price, 50%-98% OFF Global Price List. Catalyst 2960S 48 GigE PoE 740W, 2 x 10G SFP+ LAN Base
US$2,308.00
US$382.00
US$614.00
US$2,398.00
WS-C2960-24TT-L US$518.00
WS-C2960-24TC-L US$544.00
WS-C2960G-24TC-L US$1,318.00
WS-C2960-8TC-S US$398.00
WS-C2960S-48TS-L US$1,998.00
WS-C2960-48TC-L US$1,048.00