IE-4000-4TC4G-E, Cisco IE4000 Switch, 4x10/100M Combo/4x1G Combo/LAN Base

What do I consider when choosing an IE 4000 switch?

Please learn ordering guide here .

What does a Cisco switch do?

Cisco Router and switch, both are the connecting devices in networking. Where a router chooses the smallest path for a packet to reach its destination, a switch stores the arrived packets, process it and forwards it to the specified destination.

How many types of Cisco switches are there?

There are two main categories of switches: modular and fixed configuration.

Is Cisco switch a PoE?

Cisco, the one of the best networking devices manufacturers, provide us many useful PoE switches.

What are the three functions of a Cisco switch?

There are three distinct functions of layer 2 switching (you need to remember these!): address learning, forward/filter decisions, and loop avoidance.

Can Cisco switch act as router?

We can't configure routing protocols in the switch and so have to use the router for the same purpose. But in case of a Layer 3 switch e.g 3650, we could use it as a Layer 2 as well as Layer 3 device by simply issuing the command 'SWITCHPORT' or 'NO SWITCHPORT' after entering in the specific port need to be used.

Do Cisco switches have IP addresses?

Network switches can have IP Addresses depending on whether or not they are Layer 3 Switches. In production, if a Switch has an IP Address, it needs to be a static address for the purposes of monitoring and re-configuration.

How to create a VLAN on a Cisco switch?

To access VLAN database configuration mode, enter the vlan database privileged EXEC command. Then enter the vlan command with a new VLAN ID to create a VLAN, or enter an existing VLAN ID to modify the VLAN. You can use the default VLAN configuration (Table 12-2) or enter multiple commands to configure the VLAN.

What is the difference between Ethernet and industrial Ethernet?

Ethernet and Industrial Ethernet are the same thing. The only difference is that Industrial Ethernet includes running Ethernet traffic over more ruggedized hardware. For example, the cabling employed for Ethernet-based communications can vary substantially across applications.

What does industrial Ethernet switch do?

An industrial ethernet switch, also known as a power over ethernet (PoE) switch, delivers electrical power and data transmission capability to connected network devices. This means you don't have to have an independent power source for each device.

What is Cisco industrial switch?

The Cisco® Industrial Ethernet (IE) switching portfolio includes ruggedized, secure, easy-to-use switches built for extending enterprise networks to outdoor and harsh industrial environments.

What is the advantage of industrial Ethernet?

Increased speed, up from 9.6 kbit/s with RS-232 to 1 Gbit/s with Gigabit Ethernet. Ability to use ubiquitous Cat5e/Cat6 cables. Option to use optical fiber for increased distance. Ability to use standard networking hardware for wired and wireless communication.

What is the difference between industrial Ethernet switch and normal switch?

Industrial Ethernet switches have a wide operating voltage range, while regular switches require higher voltages. Regular switches are basically single power supply, while industrial switch power supplies are generally dual power supply backup. Industrial Ethernet switches can be installed in DIN rails and racks.

What is the Cisco Industrial Ethernet 4000 Series Switch?

The Cisco Industrial Ethernet 4000 Series Switch is a family of ruggedized, industrial-grade switches designed for use in harsh environments.

What are the key features of the Cisco Industrial Ethernet 4000 Series Switch?

The key features of the Cisco Industrial Ethernet 4000 Series Switch include high port density, support for multiple industrial protocols, advanced security features, and ruggedized hardware design.

What types of ports does the Cisco Industrial Ethernet 4000 Series Switch support?

The Cisco Industrial Ethernet 4000 Series Switch supports a range of copper and fiber ports, including 10/100/1000BASE-T and SFP.

What is the maximum port density of the Cisco Industrial Ethernet 4000 Series Switch?

The Cisco Industrial Ethernet 4000 Series Switch can support up to 20 or 28 ports depending on the model.

What industrial protocols does the Cisco Industrial Ethernet 4000 Series Switch support?

The Cisco Industrial Ethernet 4000 Series Switch supports a range of industrial protocols, including PROFINET, EtherNet/IP, and Modbus/TCP.

What security features does the Cisco Industrial Ethernet 4000 Series Switch have?

The Cisco Industrial Ethernet 4000 Series Switch has a range of security features, including access control lists, port security, and 802.1x authentication.

Can the Cisco Industrial Ethernet 4000 Series Switch be managed remotely?

Yes, the Cisco Industrial Ethernet 4000 Series Switch can be managed remotely using a variety of management protocols, including SNMP, Telnet, and SSH.

What is the maximum power consumption of the Cisco Industrial Ethernet 4000 Series Switch?

The maximum power consumption of the Cisco Industrial Ethernet 4000 Series Switch is 40W or 120W depending on the model.

Is the IE-4000-4TC4G-E cost-effective for industrial environments?

Yes, the IE-4000-4TC4G-E offers a robust design ideal for industrial settings while providing cost efficiency through its advanced features and reliable performance.

What are the key features of the IE-4000-4TC4G-E?

The IE-4000-4TC4G-E features 4 combo 10/100M and 4 combo 1G ports, offering versatile connectivity and a LAN Base license for enhanced network management.

In which scenarios can the IE-4000-4TC4G-E be applied?

The IE-4000-4TC4G-E is ideal for harsh industrial environments, including manufacturing, transportation, and energy sectors, ensuring reliable network connectivity.

How do I install the IE-4000-4TC4G-E switch?

The IE-4000-4TC4G-E can be easily mounted on DIN rails or in a panel using the provided mounting brackets, ensuring ease of installation in various industrial setups.

Does the IE-4000-4TC4G-E require firmware upgrades?

Regular firmware upgrades are recommended for the IE-4000-4TC4G-E to ensure optimal performance and security enhancements.

Are there alternative products to the IE-4000-4TC4G-E?

Yes, alternatives include other models in the Cisco Industrial Ethernet 4000 Series, which offer varying port configurations and features.

What accessories are available for the IE-4000-4TC4G-E?

Accessories include power supplies, mounting kits, and SFP modules to extend the functionality and ease the integration of the IE-4000-4TC4G-E.

How does the IE-4000-4TC4G-E compare to similar industrial switches?

The IE-4000-4TC4G-E stands out with its robust design, versatile connectivity options, and comprehensive network management features, making it a reliable choice for industrial applications.

How can I troubleshoot common issues with the IE-4000-4TC4G-E?

For common issues, refer to the user manual and Cisco support for troubleshooting tips and firmware updates to address connectivity and performance problems.

What makes the IE-4000-4TC4G-E suitable for industrial use?

The IE-4000-4TC4G-E is designed to withstand harsh environmental conditions, including extreme temperatures and vibrations, ensuring reliable network performance in industrial applications.

Are the products sold on router-switch.com authentic?

Yes, router-switch.com only sells 100% genuine products from authorized brands. As a multi-brand authorized distributor, all items are sourced through official channels and include valid manufacturer warranties. Customers may verify authorization via brand websites or request certification documents.