Switches

407 Products found

Set Descending Direction
Page
  1. Cisco C9300L-48P-4X-E vs C9300L-48T-4X-E: PoE or Data-Only? Quick Take The C9300L-48P-4X-E and C9300L-48T-4X-E both provide 48 Gigabit copper ports and four fixed 10G/1G SFP+ uplinks. The main difference is PoE. Choose the 48P when the switch must power access points, IP phones, cameras, or other compatible endpoints. Choose the ...
  2. Cisco N9K-C93180YC-FX3 vPC Configuration: Peer-Link, Keepalive, and Troubleshooting Quick Take A Nexus vPC domain uses two separate mechanisms: the peer-link carries synchronization and required inter-peer traffic, while the peer-keepalive path confirms whether the other peer is alive. For an N9K-C93180YC-FX3 deployment, configure the vPC domain first, ...
  3. Cisco Catalyst 9200/9300 QoS Queue Scheduling: Weighted Bandwidth, WTD, and Congestion Troubleshooting Quick Take On Catalyst 9200 and 9300 switches, the search term “weighted round robin” usually refers to queue scheduling through commands such as bandwidth percent and bandwidth remaining percent. WTD controls when queued packets are dropped, while queue buffers ...
  4. NVIDIA Mellanox SN2010 vs SN2100 vs SN2700: Rack Depth, Airflow, and Power Guide Quick Take Choose SN2010 for dense 10/25GbE server access with 40/100GbE uplinks, SN2100 for compact half-width 40/50/100GbE switching, and SN2700 for high-density 100GbE leaf or spine deployments. Before ordering, verify the exact OPN, rack depth, airflow direction, PSU ...
  5. What Equipment Is Needed for a RoCE Network? NICs, Switches, Cables, and BOM Checklist Quick Take A production RoCE network requires RDMA-capable server adapters, RoCE-aware switches, compatible optics or cables, host drivers, switch QoS configuration, and a separate management path. Link speed alone is not enough; PFC, ECN, buffers, FEC, breakout mode, and ...
  6. Wi‑Fi 7 AP Switch Selection: Multigig Ports, 802.3bt PoE, Power Budget, and Cabling Quick Take Select a Wi-Fi 7 AP switch by checking four items together: multigigabit port speed, PoE standard, total PoE budget, and cabling. A 1G port may power an AP, but 2.5G, 5G, or 10G may be required for the target wireless capacity and future expansion. A Wi-Fi 7 ...
  7. Cisco-Validated SONiC on Nexus 9000: Supported Scope, NX-OS vs ACI, and Migration Checks Quick Take Cisco has announced Cisco-validated SONiC for selected Nexus 9000 Cloud Scale deployments, including high-density 100G and 400G leaf-spine environments. However, Cisco has not published a complete SKU-by-SKU support matrix. Do not assume that every Cloud Scale model, including ...
  8. Rugged PoE Switch Selection Guide: Environment, Power Budget, Ports, and Uplinks Quick Take A rugged PoE switch should be selected by the installation environment, PoE load, uplink speed, and expansion plan. The IE-3300-8P2S-E is a practical fit for industrial access networks that need 8 Gigabit PoE+ ports, 2 Gigabit SFP uplinks, DIN rail installation, dual DC ...
  9. How Many Switches Do You Need for an AI GPU Cluster? 400G/800G Leaf-Spine Sizing and BOM Quick Take There is no single switch count that fits every AI GPU cluster. The required number depends on GPU server count, network ports per server, 400G or 800G link design, leaf port density, spine topology, storage and management networks, redundancy, and future expansion. ...
  10. How to Identify a Data Center Switch by PID, VID, and Serial Number—and Find a Compatible Replacement Quick Take A serial number identifies one physical switch, but it is not enough to select a compatible replacement. Confirm the exact PID or part number, hardware revision, port layout, optics, airflow, power configuration, installed NOS, and lifecycle status before purchasing a ...

407 Products found

Set Descending Direction
Page