FAQ banner
Get the Help and Supports!

This help center can answer your questions about customer services, products tech support, network issues.
Select a topic to get started.

ICT Tech Savings Week
2025 MEGA SALE | In-Stock & Budget-Friendly for Every Project

How To Improve The Signal Strength Of 5GHz Wireless Connection Of The TP-Link Routers?


Before getting to far with 5GHz deployment, please pay attention to your geographical location and confirm the local law or regulation for 5GHz Wireless LAN required.

Generally, the lower the frequency the farther a wireless signal can travel. Therefore, devices on a 5 GHz network will tend to have a shorter range than those using 2.4 GHz. This can be mitigated somewhat with sophisticated antenna technology, but if a given device is relatively far from the wireless access point, you may have better luck connecting via 2.4 GHz.

Also the higher frequency will be more sensitive to obstacle and more attenuation caused when passing through the walls, ceiling, etc due to the relatively poor diffraction.

Here we take two pictures as example:

SNR: Signal-to-noise ratio is a measure used in science and engineering that compares the level of a desired Signal to the level of background Noise. It is defined as the ratio of signal power to the noise power. A ratio higher than 1:1 (or 0dB) indicates more signal than noise.

Solution:

Since the intrinsic properties of 5GHz wireless radio, there are no true sense solutions to improve the performance immediately, here we recommend following steps to optimize the wireless connection.

- Please confirm your wireless router/access point or client can support 5GHz wireless radio;

- Deploy your wireless router/access point close enough to your wireless equipment vice versa;

- Avoid the physical barrier because they will absorb the wireless signal dramatically;

- Try to change another channel within the local regulation;

Here we take Archer C7 as an example. Please log into the management page then select Advanced>Wireless> 5GHz, and choose another channel to deploy. You can take the following picture as reference.

- If you really need better wireless coverage, however, the 5GHz frequency cannot meet your demand after following the suggestions above, please try to switch to 2.4GHz.

By the way, you can check the price of TP-Link Routers.

Learn more:

What Should Be Paid Attention To When Choosing Antenna For TP-Link Router?

Why Can't I Log In To The Web Management Utility Of The TP-Link Device?

What Is Running Out of IPv4? What Is IPv6?

How to Change the MTU Settings in TP-Link WiFi Routers?

FAQs About The TP-Link Routers' speed

How To Set Up IPv6 Service On The TP-Link Wireless Router?

How To Make The GE Port Of The AP To Provide Service?

How To Update TP-Link Router Firmware?

How To Setup TP-Link WiFi Router?

How to Connect TP-Link Router to Modem?


Categories: Routers