C9200L-48T-4X-E

Can I stack Cisco Catalyst 9200 Series Switches with the Cisco Catalyst 2960-X/XR Series Switches?

These switches do not stack together. Features are packaged differently between these platforms, they use different CPU architectures, and the platforms do not have the same scaling, making stacking with them impossible.

What type of airflow do Cisco Catalyst 9200 Series switches support?

The airflow on Cisco Catalyst 9200 Series switches is “front and sides” to back airflow.

Can I use both console ports on Cisco Catalyst 9200 Series switches simultaneously?

No. When you use the USB console, the RJ-45 console receives the output of the USB console as well. This design allows the administrator to see when the USB console port is in use. This capability is useful for remote administrators.

Can Cisco Catalyst 9200 Series switches act as a wired switch?

Cisco Catalyst 9200 Series switches provide connectivity for wired endpoints and wireless endpoints by connecting wireless access points. With the SD-Access architecture, the wired and wireless endpoints gets the same experience.

Do Cisco Catalyst 9200 Series switches support auto-baud on the console port?

No.

What are the supported uplink modules for Cisco Catalyst 9200 Series switches?

Catalyst 9200 Series switches support the following uplink options: 4x 1 Gigabit Ethernet network module, and 4x 10 Gigabit Ethernet network module.

Which old series of Catalyst switches will be replaced by Catalyst 9200?

You can upgrade your Catalyst 2960X/XR to Catalyst 9200, but you still can use 2960X/XR switches.

What features does the Catalyst 9200 switch provide?

Cisco Catalyst 9200 Series of enterprise-class access switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. Compared to the scale and feature richness the of Catalyst 9300 Series switches, Catalyst 9200 Series switches focus on offering right-sized switching for simple branch deployments. With its family pedigree, Catalyst 9200 Series offers simplicity without compromise – it is secure, always on and provides a new level of IT simplicity. These switches also support full IEEE 802.3at PoE+, fixed and modular uplink options with field-replaceable network modules, redundant fans, and power supplies and a variety of uplink modules.

Does this model include one uplink module?

Yes. Each C9200L include an uplink module.

What does a Cisco switch do?

Cisco Router and switch, both are the connecting devices in networking. Where a router chooses the smallest path for a packet to reach its destination, a switch stores the arrived packets, process it and forwards it to the specified destination.

How many types of Cisco switches are there?

There are two main categories of switches: modular and fixed configuration.

Is Cisco switch a PoE?

Cisco, the one of the best networking devices manufacturers, provide us many useful PoE switches.

What are the three functions of a Cisco switch?

There are three distinct functions of layer 2 switching (you need to remember these!): address learning, forward/filter decisions, and loop avoidance.

What is Cisco Catalyst used for?

Cisco Catalyst access switches bring wired and wireless together to dramatically simplify operations and continuously optimize to support business goals.

Is Cisco Catalyst a router?

Cisco Catalyst Cellular Gateways are LTE- and 5G-capable routers. They offer Gigabit speeds together with plug-and-play capabilities. Cisco makes two models; the 522-E for 5G and the Cisco Catalyst CG418-E for 4G LTE signals.

What is the difference between c9200 and C9200L?

Model Types. The Catalyst 9200 series comes in two major flavors, the 9200 and the 9200L. The main different between the two is the 9200 is a fully module switch with different uplink modules and modular fans while the 9200L has 4 fixed SPF+ uplinks that will support up to 10 Gigabit connections and fixed fans.

Can you stack C9200 and C9200L?

You cannot stack fixed (C9200L SKUs) with modular (C9200 SKUs) models, or other Catalyst switches, e.g. Cisco Catalyst 2960-X and 2960-XR Series.

How many Ethernet ports does C9200L-48T-4X-E have?

C9200L-48T-4X-E has 48 Gigabit Ethernet ports.

Does C9200L-48T-4X-E support Power over Ethernet (PoE)?

No, C9200L-48T-4X-E does not support PoE.

What are the uplink interface options for C9200L-48T-4X-E?

C9200L-48T-4X-E supports 4x 10 Gigabit Ethernet uplink interfaces.

Is C9200L-48T-4X-E stackable?

Yes, C9200L-48T-4X-E supports stacking, allowing multiple switches to be interconnected and managed as a single unit.

What is the default power supply of C9200L-48T-4X-E?

The default power supply of C9200L-48T-4X-E is AC power supply.

What is Router-switch?

Router-switch is a company that sells networking equipment such as routers, switches, firewalls, and other related products.

What brands does Router-switch carry?

Router-switch carries a variety of networking equipment brands such as Cisco, Huawei, Juniper, HP, Dell, and more.

Does Router-switch ship internationally?

Yes, Router-switch ships their products internationally. However, customers may need to pay additional customs and taxes depending on their country's regulations.

Does Router-switch offer discounts or promotions?

Yes, Router-switch often offers discounts and promotions on their products. Customers can check their website or subscribe to their newsletter to stay updated on current offers.

Does Router-switch offer customized solutions for specific networking needs?

Yes, Router-switch offers customized solutions for specific networking needs. Customers can contact their sales team and provide their requirements to receive a personalized quote and solution.

How many types of Cisco switches are there?

There are two main categories of switches: modular and fixed configuration.

Is Cisco switch a PoE?

There are two main caCisco, the one of the best networking devices manufacturers,provide us many useful PoE switches.es of switches: modular and fixed configuration.

What is the difference between industrial Ethernet switch and normal switch?

Regular switches are basically single power supply, while industrial switch power supplies are generally dual power supply backup. Industrial Ethernet switches can be installed in DIN rails and racks.

What are the three functions of a Cisco switch?

There are three distinct functions of layer 2 switching (you need to remember these!):address learning, forward/filter decisions, and loop avoidance.

Do Cisco switches have IP addresses?

Network switches can have IP Addresses depending on whether or not they are Layer 3 Switches. In production, if a Switch has an IP Address, it needs to be a static address for the purposes of monitoring and re-configuration.

What are the key features of Cisco switches?

Cisco switches offer advanced features such as high-performance switching, scalability, robust security, comprehensive management options, and support for advanced protocols and technologies.

How do Cisco switches enhance network performance?

Cisco switches are designed to optimize network performance by providing fast and reliable connectivity, intelligent traffic management, advanced Quality of Service (QoS) capabilities, and low-latency switching.

Do Cisco switches support the latest networking standards?

Yes,Cisco switches support the latest Ethernet standards such as 10/100/1000 Mbps (Gigabit Ethernet) and 10/25/40/100 Gbps (Multi-Gigabit Ethernet) to meet the increasing bandwidth requirements of modern networks.

What management options are available for Cisco switches?

Cisco switches can be managed through Cisco's comprehensive network management software, such as Cisco DNA Center, Cisco Prime Infrastructure, and Cisco IOS Command-Line Interface (CLI).

What is the Cisco C9200L-48T-4X-E?

The Cisco C9200L-48T-4X-E is a network switch from the Catalyst 9200L Series, designed for enterprise-level networking.

What are the key features of the C9200L-48T-4X-E switch?

The C9200L-48T-4X-E switch features 48 data ports and 4 10G uplink ports, making it ideal for high-bandwidth data transmission. It also includes Network Essentials, providing basic enterprise features.

What are the application scenarios for the C9200L-48T-4X-E switch?

The C9200L-48T-4X-E switch is suitable for various scenarios, including small and medium-sized enterprises, remote branches, and retail environments. It provides reliable and secure network connectivity for these businesses.

Does the C9200L-48T-4X-E switch require any special software or licenses?

The C9200L-48T-4X-E switch includes Network Essentials, so there is no need to purchase any additional software or licenses for basic enterprise features.

Can the C9200L-48T-4X-E switch be upgraded?

Yes, the C9200L-48T-4X-E switch supports software upgrades to enhance performance, security, and functionality. Upgrades can be performed through Cisco's software update tools.

What accessories are available for the C9200L-48T-4X-E switch?

There are various accessories available for the C9200L-48T-4X-E switch, including power cords, rack mounting kits, and network modules. These accessories can enhance the switch's functionality and installation options.

What are the alternatives to the C9200L-48T-4X-E switch?

Some alternative switches to the C9200L-48T-4X-E include the C9200L-48P-4X-E and C9200L-48PXG-4X-E. These switches provide additional features such as Power over Ethernet (PoE) and higher port densities.

What are the common troubleshooting steps for the C9200L-48T-4X-E switch?

Common troubleshooting steps for the C9200L-48T-4X-E switch include verifying power and network connections, checking for firmware updates, and reviewing configuration settings. Cisco's technical support team can provide further assistance if needed.

Is the C9200L-48T-4X-E switch cost-effective?

Yes, the C9200L-48T-4X-E switch offers excellent value for its features and performance. It provides reliable network connectivity, advanced security features, and scalability at a competitive price point.

How do I install the C9200L-48T-4X-E switch?

Installing the C9200L-48T-4X-E switch is straightforward. It can be mounted in a standard 19-inch rack using the included rack mounting kit. Power and network connections can then be made, and the switch can be configured using Cisco's intuitive web-based interface.

How can the C9200L-48T-4X-E switch improve network performance?

The C9200L-48T-4X-E switch improves network performance by providing high-bandwidth data transmission, ensuring reliable connectivity for devices. It also supports advanced QoS features, allowing for prioritization of critical network traffic.

How cost-effective is the C9200L-48T-4X-E Switch?

The C9200L-48T-4X-E is a cost-effective option offering enterprise-level performance, security, and resilience at a competitive price point.

What are the key features of the C9200L-48T-4X-E?

Key features include 48 data ports, 4x10G uplink ports, and Cisco Network Essentials software, ensuring comprehensive network management.

What are the application scenarios for the C9200L-48T-4X-E?

The C9200L-48T-4X-E is ideal for small to medium-sized enterprise access layers, providing high performance and security.

How to install the C9200L-48T-4X-E switch?

Installation involves mounting the switch, connecting the power supply, and configuring via Cisco's Network Essentials software.

Does the C9200L-48T-4X-E need software upgrades?

Yes, regular software updates are recommended to ensure optimal security and performance.

Are there alternative products to the C9200L-48T-4X-E?

Alternatives include other models in the Cisco Catalyst 9200 series, such as the C9200L-24T-4G-E.

What are common troubleshooting steps for the C9200L-48T-4X-E?

Common steps include checking cable connections, ensuring correct port configurations, and verifying software updates.

What accessories are available for the C9200L-48T-4X-E?

Accessories include console cables, power cords, and rack mount kits specific to the Catalyst 9200 series.

How does C9200L-48T-4X-E compare with similar products?

The C9200L-48T-4X-E offers a balance of high port density, uplink capacity, and comprehensive software features compared to similarly priced switches.

What are the advantages of using the C9200L-48T-4X-E in an enterprise network?

Advantages include improved network performance, increased security, and efficient management with Network Essentials software.