C9200-NM-4G

Can I stack Cisco Catalyst 9200 Series Switches with the Cisco Catalyst 2960-X/XR Series Switches?

These switches do not stack together. Features are packaged differently between these platforms, they use different CPU architectures, and the platforms do not have the same scaling, making stacking with them impossible.

What type of airflow do Cisco Catalyst 9200 Series switches support?

The airflow on Cisco Catalyst 9200 Series switches is “front and sides” to back airflow.

What are the supported uplink modules for Cisco Catalyst 9200 Series switches?

Catalyst 9200 Series switches support the following uplink options: 4x 1 Gigabit Ethernet network module, and 4x 10 Gigabit Ethernet network module.

Which old series of Catalyst switches will be replaced by Catalyst 9200?

You can upgrade your Catalyst 2960X/XR to Catalyst 9200, but you still can use 2960X/XR switches.

What features does the Catalyst 9200 switch provide?

Cisco Catalyst 9200 Series of enterprise-class access switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. Compared to the scale and feature richness the of Catalyst 9300 Series switches, Catalyst 9200 Series switches focus on offering right-sized switching for simple branch deployments. With its family pedigree, Catalyst 9200 Series offers simplicity without compromise – it is secure, always on and provides a new level of IT simplicity. These switches also support full IEEE 802.3at PoE+, fixed and modular uplink options with field-replaceable network modules, redundant fans, and power supplies and a variety of uplink modules.

What is the c9200 nm 4g?

The c9200 nm 4g is a network module for the Cisco Catalyst 9200 Series switches that provides four Gigabit Ethernet (GE) ports for network connectivity.

What type of switches is the c9200 nm 4g compatible with?

The c9200 nm 4g is compatible with the Cisco Catalyst 9200 Series switches.

What is the maximum data transfer rate of each GE port on the c9200 nm 4g?

The maximum data transfer rate of each GE port on the c9200 nm 4g is 1 Gbps.

What is the maximum number of GE ports that the c9200 nm 4g provides?

The c9200 nm 4g provides four GE ports.

Can the c9200 nm 4g be used for uplink connectivity?

Yes, the c9200 nm 4g can be used for uplink connectivity to connect the switch to a higher-level network.

Is the c9200 nm 4g hot-swappable?

Yes, the c9200 nm 4g is hot-swappable, which means it can be replaced or removed while the switch is still operational.

What type of connector does the c9200 nm 4g use for its GE ports?

The c9200 nm 4g uses RJ-45 connectors for its GE ports.

What is the maximum cable length that can be used with the GE ports on the c9200 nm 4g?

The maximum cable length that can be used with the GE ports on the c9200 nm 4g is 100 meters.

Is the c9200 nm 4g compatible with Power over Ethernet (PoE) devices?

No, the c9200 nm 4g does not support PoE.

What is the power consumption of the c9200 nm 4g?

The power consumption of the c9200 nm 4g depends on the switch it is installed on and the number of GE ports in use. Consult the switch documentation for more information.

What are the key features of the C9200-NM-4G module?

The C9200-NM-4G module is equipped with four 1GE ports, offering high-speed connectivity for your Cisco Catalyst 9200 switch. These ports provide reliable and cost-effective network expansion options for your enterprise network.

What applications can benefit from using the C9200-NM-4G module?

The C9200-NM-4G module is ideal for applications that require additional Gigabit Ethernet ports, such as connecting access points, IP phones, and other network devices. It enables seamless integration and expansion of your network infrastructure.

How do I install the C9200-NM-4G module?

Installing the C9200-NM-4G module is easy. Simply slide it into any available network module slot on your Cisco Catalyst 9200 switch. No additional configuration is required, as the module is automatically recognized and integrated into the switch.

Can I upgrade the C9200-NM-4G module?

Yes, the C9200-NM-4G module can be upgraded to take advantage of future advancements in network technology. Cisco regularly releases firmware updates for their modules, which can be installed to enhance performance, security, and compatibility.

Are there alternative modules available?

Yes, Cisco offers a range of network modules for the Catalyst 9000 series switches, catering to different connectivity needs. You can explore other options such as the C9200-NM-2Q or C9200-NM-8X to suit your specific requirements.

What troubleshooting steps can I take if I encounter issues with the C9200-NM-4G module?

If you face any issues with the C9200-NM-4G module, ensure that it is properly installed and seated in the network module slot. You can also check for compatibility issues, verify the switch configuration, and refer to the Cisco documentation or support for further assistance.

What accessories are available for the C9200-NM-4G module?

Cisco provides various accessories to enhance the functionality and usability of the C9200-NM-4G module. These include cables, SFP modules, and other network accessories. Please refer to the Cisco website or contact your local Cisco reseller for more information.

How does the C9200-NM-4G module compare to similar products in the market?

The C9200-NM-4G module offers a highly reliable and cost-effective solution for expanding the network connectivity of your Cisco Catalyst 9200 switch. It is designed to seamlessly integrate with the switch and provides four 1GE ports, ensuring high-speed data transfer and efficient network performance.

Can I connect devices other than access points and IP phones to the C9200-NM-4G module?

Yes, the C9200-NM-4G module can be used to connect various network devices, including printers, servers, and storage devices. Its four 1GE ports provide versatile connectivity options for different devices in your network infrastructure.

Is the C9200-NM-4G module compatible with all Cisco Catalyst 9200 switches?

Yes, the C9200-NM-4G module is fully compatible with all Cisco Catalyst 9200 switches. It is designed to seamlessly integrate with these switches, ensuring a hassle-free installation process and optimal performance.

How cost-effective is the C9200-NM-4G Catalyst 9200 Network Module?

The C9200-NM-4G Catalyst 9200 Network Module provides excellent cost-efficiency, allowing for scalable network solutions without significant investment in new hardware.

What are the key features of the C9200-NM-4G Catalyst 9200 Network Module?

The C9200-NM-4G offers 4 x 1GE ports, enhancing network flexibility and supporting high-speed connectivity for Catalyst 9200 Switches.

In which application scenario is the C9200-NM-4G most effective?

This network module is ideal for enterprise environments requiring reliable, high-speed Gigabit Ethernet connections for edge switches.

How do I install the C9200-NM-4G Network Module in my network setup?

Installation involves removing the blank panel from the Catalyst 9200 switch, inserting the module, and securing it with screws. Follow the provided hardware guide for detailed steps.

Does the C9200-NM-4G Catalyst 9200 Network Module require a firmware upgrade?

The C9200-NM-4G typically operates with existing firmware but checking compatibility with the latest firmware prior to installation is advised.

Are there alternative products to the C9200-NM-4G Network Module?

Alternatives include other Cisco Catalyst 9200 series modules, like the C9200-NM-8X, which offers additional ports.

What are common troubleshooting steps for the C9200-NM-4G?

Ensure that the module is properly seated, check for firmware compatibility, and verify that all network settings are correctly configured.

What accessories or add-ons are available for the C9200-NM-4G?

Accessories include various types of compatible Ethernet cables and patch panels designed for Cisco Catalyst 9200 series switches.

How does the C9200-NM-4G compare to other 1GE Network Modules?

The C9200-NM-4G is specifically designed for the Catalyst 9200 series, offering better integration and optimized performance over generic modules.

Can the C9200-NM-4G Catalyst 9200 Network Module be used in other Cisco switch series?

No, the C9200-NM-4G is specifically designed to fit and function with Cisco Catalyst 9200 series switches only.