WS-X6148-45AF-UG, Cisco Catalyst 6500 Switch Module, 48x10/100Base-TX, 802.3af PoE, Upgrade Module

What is the primary purpose of the WS-X6148-45AF-UG?

The WS-X6148-45AF-UG is designed for upgrading Cisco 6500 series switches to support 802.3af Power over Ethernet (PoE), enhancing their capability to power PoE devices.

Can the WS-X6148-45AF-UG be used in any Cisco 6500 series switch?

Yes, it is compatible with Cisco 6500 series switches, specifically designed for a seamless upgrade to support 802.3af PoE devices.

Is there a need to power off the switch during the WS-X6148-45AF-UG upgrade?

It is recommended to power off the switch before upgrading to ensure safety and prevent any potential damage to the hardware or disruption in service.

What are the benefits of upgrading to WS-X6148-45AF-UG?

Upgrading enables the support of PoE for newer devices, reduces cable clutter, and allows for easier deployment of VoIP phones, wireless access points, and IP cameras.

Are there alternative products if the WS-X6148-45AF-UG is not available?

Yes, alternative products are available but ensure compatibility with your Cisco 6500 series switch. Options may include newer line cards that also support PoE capabilities.

How does the WS-X6148-45AF-UG compare to similar products?

The WS-X6148-45AF-UG is unique in its design to specifically upgrade Cisco 6500 switches for PoE support, offering a tailored solution not widely available in similar products.

What common troubleshooting steps are recommended for this upgrade?

Ensure compatibility with your switch model, verify the power supply can support PoE after the upgrade, and check for any software/firmware updates needed.

What accessories are included with the WS-X6148-45AF-UG?

Typically, the upgrade module comes with installation guides. However, verify the contents at purchase as accessories may vary.

How to validate the successful installation of WS-X6148-45AF-UG?

Post-installation, use the switch's management interface to verify the module is recognized and operational. Also, test with a PoE device to confirm power delivery.

Does the WS-X6148-45AF-UG require any specific software configuration?

Minimal configuration is required, but ensuring your switch's IOS supports the module is crucial. Post-installation, verify any PoE settings if needed.

How cost-effective is the WS-X6148-45AF-UG?

The WS-X6148-45AF-UG offers a cost-effective upgrade to 802.3af for existing 6148-RJ-45 modules in C6500 switch series, avoiding the need for a full hardware replacement.

What features does the WS-X6148-45AF-UG offer?

The WS-X6148-45AF-UG enables 802.3af PoE support for devices, ensuring efficient power distribution and reduced cabling complexity.

What is the application scenario for the WS-X6148-45AF-UG?

Ideal for environments requiring PoE upgrades, such as offices and data centers, without replacing the entire switch infrastructure.

How to install the WS-X6148-45AF-UG?

Simply replace the existing 6148-RJ-45 module with the WS-X6148-45AF-UG module; no additional configurations are needed.

Does the WS-X6148-45AF-UG need upgrading?

No, the WS-X6148-45AF-UG itself is an upgrade module for 802.3af PoE support, enhancing your current system's capabilities.

Are there alternatives to the WS-X6148-45AF-UG?

While the WS-X6148-45AF-UG is specifically for 6148-RJ-45 module upgrades, other Cisco switch modules could be considered based on specific needs.

What accessories are required for the WS-X6148-45AF-UG?

No additional accessories are required; the WS-X6148-45AF-UG is a direct replacement for the 6148-RJ-45 module.

How does the WS-X6148-45AF-UG compare with similar products?

The WS-X6148-45AF-UG is unique in offering 802.3af PoE upgrade capabilities for the C6500 series, which is cost-saving compared to comprehensive switch replacements.

What are the common troubleshooting steps for the WS-X6148-45AF-UG?

Ensure the module is securely connected, check compatibility with the switch, and verify firmware is updated to support 802.3af features.

What characteristics make the WS-X6148-45AF-UG stand out?

The WS-X6148-45AF-UG stands out for its ability to seamlessly upgrade 6148-RJ-45 modules to 802.3af PoE, enhancing power efficiency in existing setups.

Why should I buy from router-switch.com?

As an authorized distributor for 20+ top brands, router-switch.com offers:
- Genuine products with full warranties.
- Competitive pricing and bulk order discounts.
- Professional pre-sales and after-sales support.