Switches

24-10/100/1000BaseT/TX RJ45 ports. Gigabit Ethernet network interface with RJ-45 connectors supports 10/100/1000 Mbps transmission speed. Supports Cat5 or Cat5e UTP Cabling. (Requires minimum of 4 pairs to support 1000BaseTX). Requires E-series CMMs

OS9000 Network Interface w/24-port 10/100/1000 (RJ45) Same as the OS9-GNI-C24E but shipped in an individual module package. Requires E-series CMMs

24-10/100/1000BaseT/TX RJ45 ports with Power over Ethernet (PoE) AT support. Gigabit Ethernet network interface with RJ-45 connectors and 10/100/1000 Mbps transmission speed. Supports Cat5 or Cat5e UTP Cabling (requires minimum of 4 pairs to support 1000BaseTX.). PoE support to require a dedicated shelf and PoE power supplies ((OS9-IPSHELF & OS9-IPS-xxxA - not included).

24-unpopulated 1000BaseX ports. Gigabit Ethernet network interface with MiniGBIC (SFP MSA) connectors supports 24 MiniGBIC transceivers. MiniGBIC transceivers not included - See Transceiver section for additional ordering information. Requires E-series CMMs

OS9000 Network Interface w/ 24-port unpopulated 1000-X (SFP) Same as the OS9-GNI-U24E but shipped in an individual module package. Requires E-series CMMs

230W PoE bundle for OS9600. This POE kit for OS9600 is stand-alone and cannot operate in conjunction with the OS9000 PoE shelf (OS9-IP-SHELF) nor be redundant. The kit contains a 230W PSU. 1 cable (to connect to the 9600 chassis). 1 shelf (1 R.U. high) and 1 country specific power cord.

390W PoE bundle for OS9600. This POE kit for OS9600 is stand-alone and cannot operate in conjunction with the OS9000 PoE shelf (OS9-IP-SHELF) nor be redundant. The kit contains a 390W PSU. 1 cable (to connect to the 9600 chassis). 1 shelf (1 R.U. high) and 1 country specific power cord.

600W PoE power supply for OS9000 PoE shelf. This power supply operates within the OS9-IP-SHELF (not included). Ships with country specific power cord. fully interchangeable with OS7-IPS-600A

OS9000 bundle for PoE support. Bundle includes a Power Shelf (3.5 RU high) with 4 dedicated slots for OS9-IPS-600A PoE power supplies. 4 cables (49"""" long) for connecting the shelf to the OS9000 chassis and 1 OS9-IPS-600A. This bundle is fully interchangeable with OS7-IP-SHELF.

725W AC power supply for OS9000 / OS9000E systems (w/power cord). Needs power cord extension -xx. refer to the WPL Addendum for more information.

725W DC power supply for OS9000/OS9000E systems.

IP-SEC software license for OS9000 / OS9000E. This license enables support of IP-SEC for securing IPv6 routing protocols (RIPng / OSPFv3)

Advanced Software for MPLS support on OS9000E. MPLS support to include VPLS. LDP. advanced OAM (LSP ping/traceroute) & static-fast-reroute. One license required per chassis.

12-unpopulated 10.000BaseX ports with Enhanced capabilities. 10 Gigabit Ethernet network interface with SFP+ (SFP MSA) connectors supports 12 SFP+ transceivers. SFP+ ports support 1G/10G transceivers. SFP+ transceivers not included - See Transceiver section for additional ordering information.Requires E-series CMMs. not compatible with the OS9-SW-MPLS

OS9000E Network Interface w/ 12-port unpopulated 10.000-X (SFP+) Same as the OS9-XNI-U12E but shipped in an individual module package.

2-unpopulated 10.000BaseX ports with Enhanced capabilities. 10 Gigabit Ethernet network interface with XFP (XFP MSA) connectors supports 2 XFP transceivers. XFP transceivers not included - See Transceiver section for additional ordering information. Requires E-series CMMs

OS9000 Network Interface w/ 2-port unpopulated 10.000-X (XFP) Same as the OS9-XNI-U2E but shipped in an individual module package. Requires E-series CMMs

OS-BPS: OmniSwitch backup power shelf (BPS). It Protects against primary power supply and AC circuit failure. The BPS can actively backup 8 devises. It has total of 5 power supply bays to accommodate up to three PoE power supplies (OS-BPS-P-xx) and two 450W system power supplies (OS-BPS-S). By default the power supply shelf comes with one 450W AC power supply. four 1m. long DB25 cables. and country specific power cord. Additional system and PoE power supplies have to be purchased separately.

A pack of four DB25 1m. long cables used to connect the backup power shelf and the Omniswitch.

Modular Power Over Ethernet (PoE) AC power supply for OmniSwitch Backup Power Shelf (BPS). It provides up to 1200W @110V and 2000W @220V of PoE power. Comes with country specific power cord. Must be installed along with OS-BPS-S system power supply.