Networking Accessories

SFP-10G-SR transceiver for K-12 Education Accounts Only.

SFP-10G-LR transceiver for K-12 Education Accounts Only.

Wireless LAN RF Analysis Service.? This service provides on-site Alcatel Professional Services staff to perform a wireless data LAN RF Analysis to determine sources of interference in the RF spectrum in a given area.? Up to 100.000 square feet / 30.500 square meters of space in up to two building or locations at the same campus location may be analyzed per business day.? Travel and expenses are included with this service for the countries/areas defined in the Alcatel Professional Services ""Countries-Areas with Travel Cost Included with Services"" document that is located in the Professional Services section of the Alcatel e-Service website (http://eservice.ind.alcatel.com).? For travel to countries/areas not listed in the document. please contact the Director of Professional Services.

Wireless LAN Site Audit Service.? This service provides on-site Alcatel Professional Services staff to perform a wireless data LAN site audit (post-installation) to confirm required WLAN coverage in a given area.? Up to 50.000 square feet / 15.250 square meters of space in up to two building or locations at the same campus location may be audited per business day.? Travel and expenses are included with this service for the countries/areas defined in the Alcatel Professional Services ""Countries-Areas with Travel Cost Included with Services"" document that is located in the Professional Services section of the Alcatel e-Service website (http://eservice.ind.alcatel.com).? For travel to countries/areas not listed in the document. please contact the Director of Professional Services.

40 Gigabit to 4 x 10 Gigabit Multifiber Push-On (MPO) fiber splitter transceiver

40 Gigabit to 4 x 10 Gigabit direct attached copper splitter cable (5m. QSFP+)

40 Gigabit to 4 x 10 Gigabit direct attached copper splitter cable (3m. QSFP+)

40 Gigabit to 4 x 10 Gigabit direct attached copper splitter cable (1m. QSFP+)

40 Gigabit QSFP+ direct attached active optical cable. 20 m.

Dual-speed SFP+ optical transceiver. Supports monomode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10Km. Supports 1000BASE-LX and 10GBASE-LR.

Installation Service - Chassis Based Products. First Unit. This service provides installation of the first wired chassis-based unit at a single customer campus location during normal business hours M-F 800 AM - 500 PM local time. Travel and expenses are included.

Installation Service - Chassis. Additional Units. This service provides installation of each additional wired chassis at a single customer campus location (M-F 8 AM - 5 PM local time). This service must be executed the same / next day as that of the first unit. If this service is not executed at the time of the first unit. one should use Part Number 800003-00. Travel and expenses are included.

Installation Service - Stack & Access Based Products. First & Second Unit (excludes WLAN access products). This service provides installation of the first and second stackable or access-based unit at a single customer campus location during normal business hours M-F 800 AM - 500 PM local time). Travel and expenses are included.

Remote Professional Services for Network Products.

100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits 1550nm and receives 1310nm optical signal

100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits 1310nm and receives 1550nm optical signal

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic cable.

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

10 Gigabit industrial optical transceiver (SFP+). Supports monomode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km