When considering whether the accessories of an HPE DL388 Server apply to an HPE DL380 Server, the answer is yes, for most accessories within the same generation (especially Gen10), they are compatible and interchangeable. The HPE DL388 Gen10 models (e.g., P25215-AA1) are typically regional or pre-configured variants of the HPE ProLiant DL380 Gen10 series, ensuring strong hardware and accessory compatibility.
However, cross-generation compatibility (Gen9, Gen11) is typically limited or unavailable due to architecture and firmware differences.
1.What are HPE DL388 and DL380?
The HPE ProLiant DL380 is a widely used 2U dual-socket rack server known for performance and scalability, supporting workloads from virtualization to cloud and big data analytics.
The HPE ProLiant DL388 (e.g., P25215-AA1) is generally a variant of the DL380, sharing the same 2U form factor, processor support, memory compatibility, and expansion design, often used for specific regional markets or configurations.
2.Key Similarities and Differences (Gen10)
- Form Factor: Both are 2U rack servers.
- Processor Support: Up to two Intel Xeon Scalable processors (Bronze, Silver, Gold, Platinum).
- Memory: HPE DDR4 SmartMemory (RDIMM/LRDIMM), Optane Persistent Memory supported on DL380 Gen10, with capacities up to 3TB.
- Storage: 8 SFF drive bays standard with NVMe options and Smart Array RAID controllers (e.g., P408i-a).
- Power: Up to two HPE Flexible Slot PSUs (500W/800W options).
- Expansion: Up to 8 PCIe 3.0 slots with riser configurations.
- Management: Integrated HPE iLO5 for remote management.
- Physical Layout: Identical front/rear port layouts for Gen10 models.
3.Accessory Compatibility Table (Gen10)
Most accessories are directly interchangeable between the DL380 Gen10 and DL388 Gen10, including:
| Accessory Category | Compatibility | Examples |
| Memory | Fully compatible | HPE DDR4 RDIMM, LRDIMM, NVDIMM |
| Processors | Fully compatible | Intel Xeon Scalable Bronze/Silver/Gold/Platinum |
| RAID Controllers | Fully compatible | P408i-a, P816i-a, S100i |
| Power Supplies | Fully compatible | 500W, 800W Flexible Slot PSUs |
| Storage Accessories | Fully compatible | SFF/NVMe drive trays, HPE Smart Carriers |
| Expansion Cards | Fully compatible | PCIe NICs, HBAs |
4.Key Takeaways
- DL388 Gen10 accessories are largely compatible with DL380 Gen10.
- Cross-generation compatibility (Gen9/Gen11) is generally not supported.
- Always confirm firmware support for specific configurations.
5.FAQ
Q1: Can I use DL388 Gen10 RAM in DL380 Gen10?
Yes, they share the same memory architecture and support identical modules.
Q2: Are RAID controllers interchangeable between DL388 and DL380 Gen10?
Yes, controllers like the P408i-a are compatible across both models.
Q3: Where can I buy compatible accessories?
You can explore compatible HPE server accessories at router-switch.com for upgrades and replacements.