Cisco IE-3300-8P2S-E vs IE-3300-8T2S-E: PoE, SFP, and Industrial Deployment

Follow Us:
Quick Take
Choose the IE-3300-8P2S-E when the switch must power cameras, wireless access points, gateways, or other PoE devices. Choose the IE-3300-8T2S-E when connected equipment has independent power and the network only needs eight Gigabit copper ports plus two Gigabit SFP uplinks.

The Cisco IE-3300-8P2S-E and IE-3300-8T2S-E share the same compact Catalyst IE3300 platform, DIN-rail form factor, eight Gigabit copper ports, two 100/1000 SFP ports, dual DC input capability, and Network Essentials license. The main hardware difference is PoE: the 8P2S-E provides PoE/PoE+ copper ports, while the 8T2S-E is a non-PoE model.

1. What Is the Main Difference?
2. When Should You Choose the 8P2S-E?
3. When Should You Choose the 8T2S-E?
4. Can the 8T2S-E Be Upgraded to PoE?
5. What Do the Two SFP Ports Provide?
6. Power and Installation Considerations
7. Which Model Fits Each Deployment?
8. Information to Include in a Quote Request
9. Frequently Asked Questions
10. Final Takeaway

What Is the Main Difference?

The IE-3300-8P2S-E and IE-3300-8T2S-E are both compact industrial Ethernet switches with eight Gigabit copper ports and two 100/1000 SFP ports. The main selection factor is whether the copper ports must deliver power to connected devices.

Feature IE-3300-8P2S-E IE-3300-8T2S-E
Copper ports 8 × 10/100/1000 PoE/PoE+ RJ45 8 × 10/100/1000 RJ45
SFP ports 2 × 100/1000 SFP 2 × 100/1000 SFP
PoE budget 240W base; up to 360W with a supported expansion module Not applicable
License Network Essentials Network Essentials
Power input Redundant DC input; applicable DC voltage required for PoE/PoE+ Redundant DC input
Mounting DIN rail DIN rail
Best fit Cameras, APs, gateways, and other PoE devices PLCs, sensors, controllers, and independently powered endpoints

The -E suffix identifies the Network Essentials license level. It does not determine whether the switch provides PoE. The hardware model does that: 8P2S is the PoE direction, while 8T2S is the non-PoE direction.

When Should You Choose the 8P2S-E?

Choose the IE-3300-8P2S-E when the industrial cabinet includes devices that receive power from the switch, or when PoE may be added during the operating life of the installation.

  • IP cameras and PTZ cameras
  • Wireless access points
  • VoIP phones
  • PoE industrial gateways
  • PoE sensors and monitoring devices
  • Temporary maintenance or inspection equipment

Cisco lists a 240W PoE budget for the base configuration and up to 360W with a supported expansion module. The final available budget depends on the selected power-supply configuration, expansion hardware, and connected-device load.

Plan the PoE Budget Before Ordering

Do not size the switch only by the number of PoE ports. Record the maximum power draw of each connected device and include capacity for simultaneous operation and planned expansion.

  • Count the cameras, APs, gateways, phones, and other powered devices.
  • Record the maximum wattage required by each device.
  • Add the expected simultaneous load.
  • Compare the result with the available PoE budget.
  • Confirm that the DC power supply supports the selected PoE configuration.

When Should You Choose the 8T2S-E?

Choose the IE-3300-8T2S-E when connected devices already have independent power and the switch is used only for data connectivity.

  • PLCs with separate power wiring
  • Industrial controllers and automation equipment
  • Sensors with local or panel power
  • Non-PoE cameras
  • Access switches connected through copper or fiber
  • Industrial cabinets where PoE will not be required

The non-PoE model avoids paying for unused switch power capability. It can be a reasonable choice for a stable data-only cabinet, but the future expansion plan matters. If cameras, wireless devices, or powered gateways may be added later, the PoE model may reduce replacement risk.

Can the 8T2S-E Be Upgraded to PoE?

Not by simply adding a PoE expansion module. Cisco specifies that PoE expansion modules require a PoE-capable IE3300 base switch.

For example, an IEM-3300-8P= or IEM-3300-16P= should not be treated as a method for converting the IE-3300-8T2S-E into a PoE switch. The base hardware must support the PoE expansion design.

If future PoE is possible, compare the initial cost of the IE-3300-8P2S-E with the installation, migration, and replacement cost of changing the base switch later.

Need help choosing the right IE3300 base?

Send your device list, PoE load, and DC power details for a configuration review.

What Do the Two SFP Ports Provide?

Both models provide two 100/1000 SFP ports. These are Gigabit SFP uplinks, not native 10G SFP+ ports.

The SFP ports can be used for fiber uplinks to a plant aggregation switch, redundant paths between industrial cabinets, longer-distance connections, or links through electrically noisy areas where fiber is preferred.

  • Confirm whether the upstream device requires 1G or 10G.
  • Match the optic to the fiber type and transmission distance.
  • Verify the optic and cable against the complete switch PID.
  • Confirm the required ring, redundant-path, or uplink topology.

If the project requires native 10GbE SFP+ uplinks, review another IE3300 configuration with 10G SFP+ ports rather than selecting either 8P2S-E or 8T2S-E based only on the copper port count.

Power and Installation Considerations

Both models are designed for industrial cabinet deployment and use redundant DC input capability. The PoE model requires additional attention to the DC supply because the switch must power connected endpoints as well as its own switching hardware.

  • Confirm the available cabinet DC voltage and current.
  • Check the power requirement for the selected PoE or PoE+ mode.
  • Include the expansion module when calculating the total load.
  • Verify DIN-rail space and module width before ordering.
  • Review cabinet cooling and wiring at the maximum expected load.
  • Confirm the required temperature, vibration, and electrical-noise conditions.

For industrial installations, the correct question is not only whether the switch supports PoE. It is whether the cabinet power system can safely support the switch, the expansion hardware, and the connected devices at the same time.

Which Model Fits Each Deployment?

Industrial scenario Recommended model Reason
PLCs and controllers with separate power IE-3300-8T2S-E Data connectivity without an unused PoE budget
Small cabinet with IP cameras IE-3300-8P2S-E Provides switch-based power for compatible cameras
Industrial Wi-Fi access point deployment IE-3300-8P2S-E Supports PoE-powered access points when the power budget is sufficient
Sensors with local DC power IE-3300-8T2S-E Provides rugged Gigabit connectivity without PoE
Uncertain future device requirements IE-3300-8P2S-E Reduces the risk of replacing a non-PoE base switch later
Requirement for native 10G industrial uplinks Review an IE3300 10G configuration Neither 8P2S-E nor 8T2S-E provides native 10G SFP+ uplinks

Information to Include in a Quote Request

A complete request helps confirm the correct base switch, power configuration, expansion module, and optical accessories.

  • Exact IE3300 model and license suffix
  • Number of copper and fiber ports
  • PoE device quantity and maximum wattage
  • Required DC input voltage and redundancy
  • Required uplink speed and fiber distance
  • Expansion module requirements
  • DIN-rail or cabinet space
  • Deployment temperature and industrial environment
  • Required quantity and delivery region

For a project-specific review, provide the endpoint list, expected PoE load, DC power condition, uplink requirement, and planned expansion. This information is more useful than sending only the product family name.

Frequently Asked Questions

Q1 Is the IE-3300-8T2S-E a PoE switch?
No. The IE-3300-8T2S-E has eight Gigabit copper ports and two 100/1000 SFP ports, but it does not provide a PoE budget.
Q2 How much PoE does the IE-3300-8P2S-E support?
Cisco lists 240W for the base configuration and up to 360W with a supported expansion module. The selected power supply must also support the intended PoE load.
Q3 Do both models have the same uplinks?
Yes. Both models provide two 100/1000 SFP ports. Neither model should be treated as a native 10G SFP+ configuration.
Q4 Can I add a PoE expansion module to the 8T2S-E?
No. PoE expansion modules require a PoE-capable IE3300 base switch. The 8T2S-E should not be purchased with the assumption that a PoE module will convert it into a PoE switch later.
Q5 Is the -E suffix related to PoE?
No. The -E suffix identifies the Network Essentials license level. PoE is determined by the hardware configuration, such as 8P2S versus 8T2S.
Q6 Which model is better for industrial cameras?
Choose the IE-3300-8P2S-E when the cameras receive power from the switch. If every camera has independent power, the IE-3300-8T2S-E may be sufficient.

Final Takeaway

Choose the IE-3300-8P2S-E for PoE cameras, wireless access points, gateways, or future PoE expansion. Choose the IE-3300-8T2S-E for data-only industrial devices with independent power.

If the project requires native 10GbE SFP+ uplinks, review another IE3300 configuration with 10G SFP+ ports instead of selecting either model based only on the copper port count.

Before ordering, verify the complete PID, PoE load, DC power supply, expansion module, uplink speed, and cabinet installation requirements. The two models have similar physical platforms, but the non-PoE model cannot later be turned into a PoE switch by adding a PoE module.