Alcatel-Lucent

Two OS6250-P24 units with AOS Enterprise software for side by side mounting within a 19"" by 1RU (only) space. Provides 48 PoE RJ-45 10/100 BaseT. 4 SFP/RJ45 10/100/1000 BaseT or 100/1000 BaseX combo and four dedicated 2.5G HDMI stacking ports. 1RU form factor when mounted. External primary supplies. Includes country specific power cords. manuals/software access cards. RJ-45 to DB-9 adaptors. two 225W AC supplies. two rear mount power supply trays. two 60 cm HDMI stacking cables and mounting brackets.

DNV certified: OS6250-BP-P modular 225W AC backup power supply. Provides backup power to one PoE switch. Ships with European Union power cord.

DNV certified: Mounting brackets to stabilize the rear of unit in the back of a 19"" rack. Hardware to mount the rear of two 6250 units in a 19"" rack.

DNV6250-P48 - DNV certified: Two OS6250-P24 units with AOS Enterprise software for side by side mounting within a 19"" by 1RU (only) space. Provides 48 PoE RJ-45 10/100 BaseT. 4 SFP/RJ45 10/100/1000 BaseT or 100/1000 BaseX combo and four dedicated 2.5G HDMI stacking ports. External primary supplies. Includes European Union power cords. manuals/software access cards. RJ-45 to DB-9 adaptors. two 225W AC supplies. two rear mount power supply trays. two 60 cm HDMI stacking cables and rear mounting brackets.

100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits 1550nm and receives 1310nm optical signal

100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits 1310nm and receives 1550nm optical signal

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic cable.

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

10 m. direct attached SFP+ copper cable; industrial grade

30 cm. direct attached SFP+ copper cable; industrial grade

3 m. direct attached SFP+ copper cable; industrial grade

10 Gigabit industrial optical transceiver (SFP+). Supports monomode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km

10 Gigabit industrial optical transceiver (SFP+). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km.

1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.

1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.

Industrial grade Gigabit SFP transceiver. Supports single mode fiber. 120 km. 1550nm. LC Connector. Digital Diagnostic Monitoring (DDM). Extended Temperature -40/85C.

1000Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on 9/125 ?m SMF.

1000Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on 9/125 ?m SMF.

1000Base-LX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on 9/125 ?m SMF.