PA-MC-2E1/120= (USED)

How does the PA-MC-2E1/120= fit into my network's expansion plans?

The PA-MC-2E1/120= port adapter, designed for Cisco 7600 series, offers a cost-effective way to expand your network by adding 2 E1 ports, making it ideal for service integration. Its dual-port design enables efficient use of available slots.

What are the main features of the PA-MC-2E1/120= port adapter?

The main features include support for 2 E1 connections with a G.703 120ohm interface, offering high-density port integration for the Cisco 7600 series routers. It supports data and voice applications, enhancing versatility.

Can the PA-MC-2E1/120= be integrated with non-Cisco products?

Although primarily designed for Cisco 7600 series routers, compatibility with non-Cisco products depends on the specific interfacing and protocol support required. Consultation with a technical expert is recommended for cross-vendor setups.

Is there any need for software or hardware upgrades when installing the PA-MC-2E1/120=?

Depending on your current setup and the specific Cisco 7600 router series model, you may need to update the IOS software or might require additional memory. It's best to check compatibility and requirements before installation.

How does the PA-MC-2E1/120= compare with other E1 port adapters in the market?

Compared to other E1 port adapters, the PA-MC-2E1/120= stands out for its integration with Cisco 7600 routers, reliability, and the support from Cisco. It's specifically designed for high performance and reliability in service integration scenarios.

What is the installation process for the PA-MC-2E1/120= in a Cisco 7600 router?

Installation involves powering off the router, inserting the PA-MC-2E1/120= into an available slot, and securing it. Configuration may vary based on your network setup, so referring to Cisco's documentation is recommended.

Are there common troubleshooting steps for connectivity issues with the PA-MC-2E1/120=?

Common steps include checking physical connections, ensuring the router recognizes the port adapter, verifying configuration settings, and checking for any alarms. Cisco's diagnostic tools can also help identify and resolve issues.

What type of applications can the PA-MC-2E1/120= support?

The PA-MC-2E1/120= supports a wide range of applications, including voice and data integration, making it suitable for businesses that require efficient service integration over E1 lines.

Are there any specific environmental requirements for the PA-MC-2E1/120=?

Standard operating temperature and humidity levels for Cisco 7600 series accessories apply. Ensure good airflow and avoid exposure to extreme conditions to maintain the adapter's longevity.

What accessories come with a used PA-MC-2E1/120=?

A used PA-MC-2E1/120= typically comes without additional accessories. It's advised to verify the inclusion of any necessary cables or hardware with your supplier prior to purchase.

How cost-effective is the PA-MC-2E1/120= for system integrators?

The PA-MC-2E1/120= (USED) offers high performance at a reduced cost, making it ideal for budget-conscious system integrators.

What are the key features of the PA-MC-2E1/120=?

The PA-MC-2E1/120= provides two multichannel E1 ports with G.703 120-ohm interfaces, optimized for Cisco 7600 modules.

In what scenarios is the PA-MC-2E1/120= commonly used?

This module is suitable for WAN connectivity and high-density E1 applications in service provider and enterprise environments.

How do I install the PA-MC-2E1/120= module in a Cisco 7600 router?

Slide the module into an available slot on the Cisco 7600, secure it with screws, and configure through the IOS software.

Does the PA-MC-2E1/120= require updates or upgrades?

Ensure your Cisco IOS software is up to date to support the PA-MC-2E1/120= features and functionality.

Are there alternative products to the PA-MC-2E1/120=?

Alternatives include other Cisco E1 WAN modules, but they may not offer the same cost efficiency.

What common issues might arise with the PA-MC-2E1/120=?

Common issues include connectivity problems, often resolved by checking cables and IOS configurations.

What accessories are recommended for the PA-MC-2E1/120=?

Recommended accessories include compatible E1 cables and additional Cisco IOS software licenses if needed.

How does the PA-MC-2E1/120= compare to similar modules?

The PA-MC-2E1/120= is more cost-effective and specifically designed for high-density E1 needs on Cisco 7600 routers.

Is the PA-MC-2E1/120= compatible with other Cisco 7600 Series modules?

Yes, the PA-MC-2E1/120= is compatible with other Cisco 7600 Series modules and integrates seamlessly.

Why should I buy from router-switch.com?

As an authorized distributor for 20+ top brands, router-switch.com offers:
- Genuine products with full warranties.
- Competitive pricing and bulk order discounts.
- Professional pre-sales and after-sales support.