PA-H= (USED)

What is the compatibility of the PA-H= (USED) Cisco 7600 1-Port HSSI Port Adapter?

The PA-H= (USED) is designed specifically for use in Cisco 7600 series routers, offering high-speed serial interface (HSSI) connectivity.

What are the main features of the PA-H= (USED) HSSI Port Adapter?

This adapter provides a high-speed serial connection upto 52 Mbps, ideal for establishing WAN connections. It supports various protocols enhancing its versatility in different network architectures.

How do I install the PA-H= (USED) in a Cisco 7600 router?

Installation involves shutting down the router, inserting the port adapter into the designated slot until it locks in place, and then restarting the router for the device to be recognized.

Does the PA-H= (USED) require any special configuration to use?

Basic configuration is needed to integrate the PA-H= into your network environment. Use the Cisco IOS software command-line interface (CLI) for configuration according to your network requirements.

Are there any alternative products to PA-H= (USED) for Cisco 7600 series?

While PA-H= is tailored for the Cisco 7600 series, alternatives like the PA-2H and PA-POS-2OC3 might offer similar functionalities but with different interface types or speeds.

What is the cost-effectiveness of using a PA-H= (USED) compared to a new unit?

Opting for a used PA-H= port adapter provides significant cost savings for businesses looking to extend the capabilities of their Cisco 7600 routers without the investment in brand-new hardware.

Can the PA-H= (USED) adapter be upgraded?

Firmware updates for the PA-H= can be downloaded from the Cisco website. However, physical upgrades like speed enhancement are not possible due to hardware limitations.

What common troubleshooting steps should be followed if the PA-H= (USED) is not recognized by the router?

Ensure the PA-H= is properly seated in the slot, restart the router, and check for any IOS software updates that might be required for compatibility. If the issue persists, consider testing the adapter in a different slot.

What accessories come with the PA-H= (USED) HSSI Port Adapter?

Typically, the used PA-H= will come as a standalone unit. Any necessary cables or software would need to be acquired separately, depending on the specific requirements of your setup.

How does the PA-H= (USED) compare with the newer HSSI port adapters in terms of performance?

While the PA-H= provides reliable performance and compatibility within the Cisco 7600 series, newer models may offer enhanced features such as increased speed, lower power consumption, or support for additional protocols.

How cost-effective is the PA-H= (USED)?

The PA-H= (USED) is a cost-effective solution for expanding the capabilities of your Cisco 7600 Series router.

What are the features of the PA-H= (USED)?

The PA-H= (USED) features a 1-Port High-Speed Serial Interface (HSSI), perfect for high-speed data transfer.

What are the application scenarios for PA-H= (USED)?

The PA-H= (USED) is ideal for use in service provider networks and enterprise WANs for robust connectivity.

How do I install the PA-H= (USED)?

To install the PA-H= (USED), insert the module into a compatible slot in the Cisco 7600 Series chassis and secure it properly.

Does the PA-H= (USED) need software upgrades?

The PA-H= (USED) may require specific IOS versions for optimal performance, so ensure your system is updated.

Are there alternative products for PA-H= (USED)?

Alternatives include similar modules from other series such as the Cisco 7200 HSSI Port Adapter.

What are common troubleshooting steps for PA-H= (USED)?

Verify physical connections, ensure correct configuration on router, and check for any error messages in the logs.

What accessories are available for PA-H= (USED)?

Accessories include HSSI cables and connectors to facilitate integration with other devices.

How does PA-H= (USED) compare to similar products?

The PA-H= (USED) offers comparable performance at a lower cost compared to new models, making it suitable for budget-conscious projects.

Is the PA-H= (USED) compatible with all Cisco 7600 series routers?

Yes, the PA-H= (USED) is designed to be compatible with all Cisco 7600 series routers.