The WS-C2960+48PST-L is a LAN Base switch that provides 48 x 10/100 PoE Ethernet ports, 2 x 1000BT and 2 x SFP uplink interfaces.
Figure 1 shows the appearance of WS-C2960+48PST-L.
Table 1 shows the Quick Specs.
2 x SFP and 2 x 1000BASE-T
48 x 10/100 Ethernet Ports
Available PoE Power
Maximum Number of PoE (IEEE 802.3af) Ports
24 ports up to 15.4W
4.4cm x 45.0cm x 33.2cm
Figure 2 shows the front panel of WS-C2960+48PST-L.
① Switch LEDs ② Mode Button ③ 10/100 PoE ports ④ 10/100/1000 uplink ports ⑤ SFP module slots
·The Switch LEDs include SYST, RPS, Status, PoE, Duplex and Speed LEDs.
·10/100 PoE ports mean that Ports 1 to 48 on the switch are PoE ports
·Each of the PoE ports deliver up to 15.4 W of PoE.
Figure 3 shows the back panel of WS-C2960+48PST-L.
① RJ-45 console port ② Fan exhaust ③ RPS connector ④ AC power connector
Table 2 shows the accessories of WS-C2960+48PST-L.
Console Cable 6ft with RJ45 and DB9F
1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
GE SFP, LC connector LX/LH transceiver
Get more information
Do you have any question about the Cisco C2960+48PST-L switch?
Contact us now via Live Chat or firstname.lastname@example.org.
10/100 Ethernet Interfaces
2 SFP and 2 1000BASE-T
Cisco IOS Software Feature Set
Available PoE Power
370W (24 ports up to 15.4W)
Performance and Scalability
Maximum active VLANs
VLAN IDs available
Maximum transmission unit (MTU) - L3 packet
Jumbo frame - Ethernet frame
Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second
Dimensions (H x W x D)
1.73 x 17.70 x 13.07 in (4.4 x 45.0 x 33.2 cm)
12 lb (5.4Kg)
20.26 lb (9.19 Kg)
Operating temperature up to 5000 ft (1500 m)
23º to 113ºF
(-5º to 45ºC)
Operating temperature up to 10,000 ft (3000 m)
23º to 104ºF
(-5º to 40ºC)
Short-term exception at sea level*
23º to 131ºF
(-5º to 55ºC)
Short-term exception up to 5000 feet (1500 m)*
23º to 122ºF
(-5º to 50ºC)
Short-term exception up to 10,000 feet (3000 m)*
23º to 113ºF
(-5º to 45ºC)
Short-term exception up to 13,000 feet (4000 m)*
23º to 104ºF
(-5º to 40ºC)
Storage temperature up to 15,000 feet (4573 m)
23º to 158ºF
(-25º to 70ºC)
Up to 10,000 Feet
(Up to 3,000 Meters)
Up to 13,000 Feet
(Up to 4,000 Meters)
Operating relative humidity
10% to 95% noncondensing
Storage relative humidity
10% to 95% noncondensing
Sound Pressure, dBA
Typical, LpAm: 41
Maximum, LpAD: 44
Sound Power, dbA
Typical, LwA: 51
Maximum, LwAD: 54
MTBF in thousands of hours
Connectors and Interfaces
- 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
- 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
- 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
- 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
- Per-port status: Link integrity, disabled, activity, speed, and full duplex
- System status, Port Status, PoE, RPS, link duplex, and link speed
Cisco Catalyst console cables:
- CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
- The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.
- Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
- The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.
- Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle.
Management and Standards Support
- ePM MIB
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1p CoS Prioritization
- IEEE 802.1Q VLAN
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab (LLDP)
- IEEE 802.3ad
- IEEE 802.3af
- IEEE 802.3ah (100BASE-X single/multimode fiber only)
- IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- RMON I and II standards
- SNMP v1, v2c, and v3
- RFC 768 - UDP
- RFC 783 - TFTP
- RFC 791 - IP
- RFC 792 - ICMP
- RFC 793 - TCP
- RFC 826 - ARP
- RFC 854 - Telnet
- RFC 951 - Bootstrap Protocol (BOOTP)
- RFC 959 - FTP
- RFC 1112 - IP Multicast and IGMP
- RFC 1157 - SNMP v1
- RFC 1166 - IP Addresses
- RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery
- RFC 1305 - NTP
- RFC 1492 - TACACS+
- RFC 1493 - Bridge MIB
- RFC 1542 - BOOTP extensions
- RFC 1643 - Ethernet Interface MIB
- RFC 1757 - RMON
- RFC 1901 - SNMP v2C
- RFC 1902-1907 - SNMP v2
- RFC 1981 - Path MTU Discovery for IPv6
- FRC 2068 - HTTP
- RFC 2131 - DHCP
- RFC 2138 - RADIUS
- RFC 2233 - IF MIB v3
- RFC 2373 - IPv6 Aggregatable Addrs
- RFC 2460 - IPv6
- RFC 2461 - IPv6 Neighbor Discovery
- RFC 2462 - IPv6 Autoconfiguration
- RFC 2463 - ICMP IPv6
- RFC 2474 - Differentiated Services (DiffServ) Precedence
- RFC 2597 - Assured Forwarding
- RFC 2598 - Expedited Forwarding
- RFC 2571 - SNMP Management
- RFC 3046 - DHCP Relay Agent Information Option
- RFC 3376 - IGMP v3
- RFC 3580 - 802.1X RADIUS
Voltage and Power Ratings
100 to 240 VAC
4.0 - 2.0
50 to 60Hz
Power Rating (kVA)
DC Input Voltages (RPS Input)
3A at 12V (7A at -52V)
0% traffic: 51.1
10% traffic: 50.8
100% traffic: 51.4
ATIS weighted average: 50.9
Safety and Compliance
Products should comply with CE Marking per directives 2004/108/EC and 2006/95/EC
UL 60950-1 Second Edition
CAN/CSA-C22.2 No. 60950-1 Second Edition
EN 60950-1 Second Edition
IEC 60950-1 Second Edition
EMC - Emissions
47CFR Part 15 (CFR 47) Class A
AS/NZS CISPR22 Class A
CISPR22 Class A
EN55022 Class A
ICES003 Class A
VCCI Class A
KN22 Class A
CNS13438 Class A
EMC - Immunity
Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
Does the Cisco WS-C2960+48PST-L offer field-replaceable power supplies?
No. All power supplies are fixed.
Does the Cisco WS-C2960+48PST-L support field-replaceable fans?
No. All fans are fixed inside the chassis of the switch.
What is the airflow on the Cisco WS-C2960+48PST-L switch?
Airflow is side to back. There is a central blower in the rear of the WS-C2960+48PST-L switch that pulls the air inside the switch and blows it out the back.
How many fans do the WS-C2960+48PST-L switch have?
The WS-C2960+48PST-L switch have one blower in the center back.
Can WS-C2960+48PST-L support devices that require more than 15.4W?
No, Cisco Catalyst 2960-Plus switches support only up to 15.4W on PoE ports.
What is the Cisco Catalyst 2960-Plus Series?
The Cisco ® Catalyst ® 2960-Plus Series is a series of enterprise-class fixed-configuration Layer 2 Fast Ethernet access switches, ideal for branch offices, wired workspaces, and infrastructure networks.
Why should I purchase a technical service contract for these switches when they include an enhanced limited lifetime warranty (E-LLW)?
Cisco service and support has received numerous industry recognitions and awards for excellence in technology service and support.
Does the WS-C2960+48PST-L support Smart Install?
Only in client mode. A Cisco Catalyst 2960-Plus switch cannot act as a Smart Install director.
What is the airflow on the WS-C2960+48PST-L?
Airflow is side to back. There is a central blower in the rear of the Cisco Catalyst 2960-Plus switches that pulls the air inside the switch and blows it out the back.
Does the WS-C2960+48PST-L support MACsec (802.1ae)?
No. MACsec is supported on other Cisco Catalyst switches, including the Cisco Catalyst 3750-X and Cisco Catalyst 3850.
- Shipping & Payment
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time DHL 2-4 business days Fedex 2-4 business days Hong Kong EMS 5-10 business days Hong Kong Air Parcel 10-20 business days By Sea 10-20 business days
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Router-switch.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.Router-switch.com can facilitate the progress under buyer's permission and at buyer's expense.
Deliver to door:
Router-switch.com will quote all destination charge prior once we have confirmed order.
Router-switch.com is responsible for transporting goods to door after you have made the payment.
Paypal Master Card Visa Discover American
JCB Wire Transfer eCheck WestUnion
100% Low Price Guarantee:
Router-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance:
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed" or "Used / Refurbished".
Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.
Free CCIE Technical Support:
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Cisco product: 1 Year
Used Cisco product: 3 Month
The Support Contacts:
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.