VWIC-2T1/E1-RAN

Model: VWIC-2T1/E1-RAN Router Multiflex Voice/WAN interface Card
Detail: 2-Port RJ-48 T1/E1 Protection Switching RAN/ITP/SLT WIC
Replacement: VWIC3-2MFT-T1/E1
List Price: US$3,500.00
Price: $1,645.00
You save: US$1,855.00 (53% OFF)
Condition: Brand New Sealed
Availability: In stock
Shipping:
Express Shipping to Worldwide
2-6 Days, via DHL, FedEx, EMS, etc. ?
If you finish the payment today,
your order will arrive within the
estimated delivery time.
US$ 1,645.00 In stock Brand New Sealed
OR

VWIC-2T1/E1-RAN SMARTnet Service Tool

Order Cisco SMARTnet Warranty? Fast Quote Now

Ask Our Experts

Live Chat | Email

  • +1-626-239-8066 (USA)
  • +852-3174-6166 (HK)
  • +852-3050-1066 (Fax)
Get Quotes up to
2x Faster
Project Inquiry
Overview

Overview (VWIC-2T1/E1-RAN)

Today's mobile wireless operators need a flexible Radio Access Network (RAN) to efficiently support multiple generations of radio technologies and quickly adapt as their network characteristics and business needs evolve. And, to remain profitable, operators must reduce operating expenses (OpEx) while expanding their networks and providing new services.
The Cisco RAN Optimization Solution is a comprehensive family of IP-based solutions to optimize RAN architectures. An optimized RAN can significantly reduce OpEx and support new revenue-generating services for both GSM and UMTS mobile wireless operators. The solution includes a bit-transparent technology that integrates smoothly into an existing RAN, providing optimized RAN transport over IP to increase bandwidth efficiency of GSM/GPRS/EDGE and UMTS/HSDPA backhaul transport. The solution also provides cell-site IP points of presence (POPs) to enable profitable new services and applications, and alternative RAN backhaul support to economically transport high-throughput cell-site traffic such as circuit-switched Universal Mobile Telecommunications Service (UMTS) data and High-Speed Downlink Packet Access (HSDPA) traffic.
The Cisco 2-Port T1/E1 Protection Switching RAN VWIC is an integral part of the Cisco RAN Optimization Solution. The Cisco T1/E1 RAN VWIC supports traditional T1/E1 communications and it features advanced processing for applications such as the Cisco RAN Optimization Solution and circuit emulation over packet or standard-based Pseudowire Emulation Edge to Edge (PWE3). For example, the VWIC enables the Cisco MWR 1941-DC-A Mobile Wireless Router's cell-site access platform to perform optimization of delay-sensitive GSM/GPRS/EDGE traffic for efficient and transparent transport over traditional T1/E1 RAN backhaul networks, achieving efficiency gains up to 50 percent and often more, as well as over alternative RAN backhaul networks such as DSL, IEEE 802.16, and Metro Ethernet. With PWE3 support, the Cisco T1/E1 RAN VWIC enables mobile operators to extend their service offering. Operators can use more scalable, more robust Multiprotocol Label Switching (MPLS) networks to provide standards-based circuit emulation services and to carry data streams or protocols that do not meet the format requirements of other multiservice platform interfaces. In addition, the Cisco T1/E1 RAN VWIC supports an extended operating temperature, and features solid-state protection switching relays to support 1:1 cell-site access-platform redundancy for high availability with a custom T1/E1 Y-cable.

Specification

Specification (VWIC-2T1/E1-RAN)

VWIC-2T1/E1-RAN

Manufacturer

Cisco

Part Number

VWIC-2T1/E1-RAN

Device Type

Interface module

Form factor

Cisco 2-Port T1/E1 Protection Switching RAN VWIC

Specifications

Feature

• Two independent T1/E1 or fractional T1/E1 ports with RJ-48C physical connectors

• Software-configurable T1/E1 mode

• T1/E1 interface loopbacks, 75- and 120-ohm impedances (balanced and unbalanced), framing (SF and ESF), and line codes (AMI, B8ZS, HDB3); support for E1 structured and unstructured operation

• LEDs for data carrier detect (DCD), loopback (LP), and alarm (AL)

Dimensions (H x W x D)

0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm)

Weight

0.12 lb (56 g) minimum, 0.18 lb (81 g) maximum

Operating Temperature

-10 to +55°C (14 to 131°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Relative Humidity

5 to 90% noncondensing, ±5%

DSU/CSU

• Selectable DSX-1 cable length in increments from 0 to 655 ft in DSU mode

• Selectable DS-1 CSU line build-out: 0, -7.5, -15, and -22.5 dB

• Selectable DS-1 CSU receiver gain: 26 or 36 dB

Diagnostics

• ANSI T1.403 Annex B/V.54 loopup/down code recognition, network loopback, user initiated loopbacks, network payload loopback, local DTE loopback, remote line (codes: V.54, loop up, and loop down)

• BERT patterns all 0's, all 1's, 1:2, 1:8, 3:24, QRW, QRSS, 63, 511, 2047, and V.54/T1.403 Annex B bit patterns; two user-programmable 24-bit patterns

• Alarm detection: Alarm indication signal (AIS), time slot 16 AIS, remote alarm, far-end block error (FEBE), out of frame (OOF), cyclic redundancy check (CRC) multiframe OOF, signaling multiframe OOF, frame errors, CRC errors, loss of network signal (red alarm), loss of network frame, receive (blue alarm) (AIS) from network, receive (yellow) from network performance reports/error counters CRC, errored seconds, burst errored seconds, severely errored seconds, Ft and Fs framing errors for SF framing, FPS framing errors for ESF framing, 24-hour history stored in 15-minute increments

• Onboard processor for real-time facility data link (FDL) messaging, in-band code detection and insertion, alarm integration, and performance monitoring

• Full FDL support and FDL performance monitoring, according to configurable standard: ANSI T1.403 or AT&T TR 54016

 

 

Shipping & Payment

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery OptionsEstimated Delivery Time
DHL 2-4 business days
Fedex 2-4 business days
Hong Kong EMS 5-10 business days
Hong Kong Air Parcel 10-20 business days
By Sea 10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

Router-switch.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.Router-switch.com can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

Router-switch.com will quote all destination charge prior once we have confirmed order.
Router-switch.com is responsible for transporting goods to door after you have made the payment.

Payment Methods

Paypal Master Card Visa
Discover American
Express
JCB
Wire Transfer eCheck WestUnion
Warranty

Warranty

100% Low Price Guarantee:

Router-switch.com provides high-quality products at low wholesale prices

100% Quality Assurance:

All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed" or "Used / Refurbished".
Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

Free CCIE Technical Support:

Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee:

You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment:

Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Cisco product: 1 Year
Used Cisco product: 3 Month

The Support Contacts:

If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Reviews

Customer Reviews

5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Stars
0

Share your thoughts with other customers?

You may also be interested in the following product(s)

Register now to get updates on promotions and coupons

We’ll never share your email address with a third-party.

Router-switch.com is neither a partner of nor an affiliate of Cisco Systems. Logos remain the property of the corresponding company.
Copyright @ 2002-2017 Router-switch Ltd. | HongKong Yejian Technologies Co., Ltd | All Rights Reserved.