SFP-OC3-LR2, Cisco SFP Transceiver, OC3/STM1/80km/Single-mode

What is the maximum transmission distance of SFP-OC3-LR2?

The SFP-OC3-LR2 module supports a maximum transmission distance of up to 80 kilometers over single-mode fiber, making it suitable for long-distance networking needs.

Can SFP-OC3-LR2 be used in multimode fiber applications?

No, the SFP-OC3-LR2 is specifically designed for use with single-mode fiber applications. It cannot be used with multimode fiber.

Is the SFP-OC3-LR2 compatible with all Cisco routers and switches?

While the SFP-OC3-LR2 is broadly compatible with Cisco devices, it's important to verify the specific device's compatibility list or with technical support to ensure proper operation.

Does the SFP-OC3-LR2 require any special configuration?

Generally, the SFP-OC3-LR2 will be recognized and auto-configured by compatible devices. However, certain network scenarios may require additional configuration for optimal performance.

What is the significance of the OC3/STM1 specification?

OC3/STM1 specification denotes a data transfer rate of up to 155.52 Mbps, making the SFP-OC3-LR2 suitable for applications requiring moderate bandwidth over long distances, such as metropolitan area networks (MANs).

Are there any alternative products to SFP-OC3-LR2?

Alternatives to the SFP-OC3-LR2 might include other SFP modules with varying reach and bandwidth capacities. It's imperative to assess bandwidth and distance requirements before selecting an alternative.

Does SFP-OC3-LR2 support hot-swapping?

Yes, the SFP-OC3-LR2 supports hot-swapping, allowing for module replacement or upgrades without needing to power down the networking device.

What type of connector is used with the SFP-OC3-LR2?

The SFP-OC3-LR2 module uses the LC connector, a common interface for single-mode fiber connections.

How can I tell if my SFP-OC3-LR2 is functioning properly?

Indicators of proper functioning include a stable link light on the networking device, successful completion of self-diagnostics during startup, and expected data transmission rates. Testing with diagnostic tools is also recommended.

Are there any special maintenance requirements for SFP-OC3-LR2?

Regularly check and clean the optical connectors to maintain optimal performance. Additionally, ensure the firmware of the hosting device is up to date to prevent compatibility issues.

How cost-effective is the SFP-OC3-LR2?

The SFP-OC3-LR2 provides reliable performance at a competitive price, making it a cost-effective solution for long-distance single-mode fiber connections.

What are the key features of the SFP-OC3-LR2?

The key features of the SFP-OC3-LR2 include OC3/STM1 support, single-mode fiber compatibility, and a long reach of up to 80km.

In which scenarios is the SFP-OC3-LR2 used?

The SFP-OC3-LR2 is ideal for long-distance data transmission in enterprise, data center, and carrier network environments.

How do I install the SFP-OC3-LR2?

To install the SFP-OC3-LR2, insert the module into the SFP port of your switch or router and connect the single-mode fiber cable.

Does the SFP-OC3-LR2 require a firmware upgrade?

The SFP-OC3-LR2 usually does not require a firmware upgrade, but always check the compatibility with your existing hardware.

Are there alternative products to the SFP-OC3-LR2?

Alternative products to the SFP-OC3-LR2 include other Cisco SFP modules with similar specifications, such as the SFP-OC3-IR1.

What accessories are available for the SFP-OC3-LR2?

Accessories for the SFP-OC3-LR2 typically include compatible single-mode fiber cables and dust caps for protection.

How does the SFP-OC3-LR2 compare with similar products?

The SFP-OC3-LR2 offers a longer reach of 80km compared to some other SFP modules, making it suitable for extended distances.

What common issues can occur with the SFP-OC3-LR2?

Common issues with the SFP-OC3-LR2 include compatibility problems with non-Cisco equipment and signal loss over long distances.

How can I troubleshoot the SFP-OC3-LR2?

To troubleshoot the SFP-OC3-LR2, ensure it is correctly inserted, check the fiber connections, and verify the device's compatibility with the module.

Why should I buy from router-switch.com?

As an authorized distributor for 20+ top brands, router-switch.com offers:
- Genuine products with full warranties.
- Competitive pricing and bulk order discounts.
- Professional pre-sales and after-sales support.