Cisco Catalyst 2960X-24TS-LL LAN Lite Layer 2 switch provides standalone mode with no FlexStack plus supporting and no NetFlow lite features.
Figure 1 shows the front view of the Cisco 2960X-24TS-LL switch.
Table 1 shows the Quick Spec of the Cisco 2960X-24TS-LL switch.
Rack-mountable - 1U
2 x 1G SFP
24 x Ethernet 10/100/1000 Gigabit ports
44.5 cm x 27.9 cm x 4.5 cm
Figure 2 shows the front panel of the Cisco 2960X-24TS-LL switch.
① Ethernet management port ② Mode button ③ Switch LEDs ④ USB mini-Type B (console) port ⑤ USB Type A ports
⑥ SFP module ports ⑦ 24*10/100/1000 ports SFP module ports ⑧ CONSOLE LED ⑨ MGMT LED ⑩RJ-45 console port
Figure 3 shows the back panel of the Cisco 2960X-24TS-LL switch.
Note: ① Fan Exhaust ③ RPS Connector ④ AC power connector
Figure 4 shows the unboxing view of WS-C2960X-24TS-LL.
Table 2 shows some accessories of the WS-C2960X-24TS-LL.
GE SFP, LC connector LX/LH transceiver
1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
Console Cable 6ft with RJ45 and DB9F
Console Cable 6 ft with USB Type A and mini-B
Get more information
Do you have any question about the Cisco Catalyst C2960X-24TS-LL switch?
Contact us now via Live Chat or firstname.lastname@example.org.
Rack-mountable - 1U
24 x 10/100/1000 + 2 x 1G SFP
Network management Interface
10/100 Mbps Ethernet (RJ-45)
Available PoE Power
Maximum stacking number
Maximum active VLANs
MAC Address Table Size
APM86392 600MHz dual core
Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, PoE, and link speed
Expansion / Connectivity
USB (Type-B), Ethernet (RJ-45)
Voltage range (Auto)
Power Consumption Operational
17.5 Inches (44.5 cm)
11 Inches (27.9 cm)
1.75 Inches (4.5 cm)
8.2 Pounds (9.19Kg)
20.26 Pounds (3.7Kg)
Rack Mounting Kit
MTBF in hours
IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.1Q VLAN
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1X
● IEEE 802.1ab (LLDP)
● IEEE 802.3ad
● IEEE 802.3af and IEEE 802.3at
● IEEE 802.3ah (100BASE-X single/multimode fiber only)
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● RMON I and II standards
● SNMP v1, v2c, and v3
● IEEE 802.3az
● IEEE 802.1ax
System software / license
IOS LAN Lite
● Jumbo Frames
● 802.3ad LACP
● Port Fast/Uplink Fast
● port CoS Trust and Override
● Priority Queuing
● Configure CoS Priority Queues
● Weighted Tail Drop
● DSCP transparency
● SSH, SSL and SCP
● RADIUS and TACACS+
● SNMPv3 crypto
● 802.1x Accounting / MIB
● 802.1x w/ port security
● 802.1x w/Voice VLAN
● 802.1x Guest VLAN
● 802.1x VLAN assignment
● 802.1x MAC-Auth Bypass
● BPDU/Root Guard
● Port Security
● Private VALN Edge
● Storm Control
● Block unknown unicast and multicast
● IGMP Snooping
● IGMP Filter/Throttle
Management and Troubleshooting
● IP SLA Responder
● layer 2 / IP Traceroute
● Express Setup
● Device Manager
● Cisco Network Assistant
● Smartports + Advisor
● Troubleshooting Advisor
● Drag-and-drop Cisco IOS Upgrade
● IP Address DHCP
● Autoinstall with saved configuration
● Configuration Replace
● DHCP Auto Image Upgrade
● DHCP Port Based Allocation
● Error Disable MIB
Operating temperature up to 5000 ft (1500 m)
23ºF to 113º
Operating temperature up to 10,000 ft (3000 m)
23ºF to 104ºF
Short-term exception at sea level*
23ºF to 131ºF
Short-term exception up to 5000 feet (1500 m)*
23ºF to 122ºF
Short-term exception up to 10,000 feet (3000 m)*
23ºF to 113ºF
Short-term exception up to 13,000 feet (4000 m)*
23º to 104ºF
Storage temperature up to 15,000 feet (4573 m)
-13º to 158ºF
Up to 10,000 feet
Up to 13,000 feet
Operating relative humidity
10% to 95% noncondensing
Storage relative humidity
10% to 95% noncondensing
Hi, Can you tell us a Cisco 2960-X Series feature set license can be upgraded or not?
In fact, the feature set is bound to the hardware model. If you need the features and capabilities of IP Lite, you must purchase an IP Lite switch, such as WS-C2960X-48TS-LL and 2960X-24TS-LL.
Can the WS-C2960X-24TS-LL feature set license be upgraded?
No. The feature set is bound to the hardware model.
What is difference between FlexStack and FlexStack-Plus technology?
The FlexStack-Plus technology is similar to FlexStack technology except it supports up to 8 stackable members, and higher bandwidth.
Can Cisco Catalyst 2960-X switches and 2960-XR switches stack together?
No. Cisco Catalyst 2960-X and 2960-XR switches can’t be stacked together, even though they belong to the same 2960-X series they do not share same IOS License models.
Does WS-C2960X-24TS-LL support PoE?
No, it doesn’t.
How do I check if EEE is working?
The “show eee status interface Gigabit Ethernet xxx” command can be used to check if EEE is agreed between both the endpoints.
Can both USB Type B console and RJ-45 console ports be used simultaneously?
No. Only one can be used for input, but both can receive output. When the USB console is connected, “it is used for input (by default)”. This design allows the administrator to see when the USB console port is in use. This capability is useful for remote administrators.
Do the WS-C2960X-24TS-LL support Cisco EnergyWise?
What is Downlink Hibernation Mode in the WS-C2960X-24TS-LL?
Downlink Hibernation Mode (DHM) feature enables all 2960-X switches to save power on the downlink ports. The switch supports static downlink port power-down where only the PHY and Optics are powered down when not in use.
Is NetFlow-Lite supported on all Cisco Catalyst 2960-X Series models?
NetFlow-Lite is not supported on LAN Lite models. It is supported on LAN Base and IP Lite models of the Cisco Catalyst 2960-X Series.
- Shipping & Payment
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time DHL 2-4 business days Fedex 2-4 business days Hong Kong EMS 5-10 business days Hong Kong Air Parcel 10-20 business days By Sea 10-20 business days
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Router-switch.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.Router-switch.com can facilitate the progress under buyer's permission and at buyer's expense.
Deliver to door:
Router-switch.com will quote all destination charge prior once we have confirmed order.
Router-switch.com is responsible for transporting goods to door after you have made the payment.
Paypal Master Card Visa Discover American
JCB Wire Transfer eCheck WestUnion
100% Low Price Guarantee:
Router-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance:
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed" or "Used / Refurbished".
Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.
Free CCIE Technical Support:
Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Cisco product: 1 Year
Used Cisco product: 3 Month
The Support Contacts:
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.